I have a 88 crx si, and I'm putting in b16 sir. I have my four wires connected to the vtec, vtec oil pressure, second o2, and knock. I'm going to put them into my ecu harness, but I noticed 2 of the 4 wires, I can't, because there's no pins in the harness connector that goes into the ecu for those two locations(they're empty and not used previously). So, how do I go about getting those two wires into the harness? I tried the local junkyards, and no go on crx's there. I tried to cut a harness off a 90 accord, but it had a different connector and the pins are way too small. Is there some wires on my ecu that I don't need with this b16 that I can salvage and reuse on the two locations I need? Thanks in advance for the help. Any is appreciated.