sleepn_accord
Senior Member
Ok. So my friend and I did a B16A swap into a 91 civic SI.
Runs fine.
We wired up the VTEC associated wires according to a schematic I found which was as follows:
A8 - VTEC solenoid
B5 - VTEC pressure switch
B19- Knock Sensor
C8 - 2nd O2 sensor
Now, we're getting the following codes:
7, 17, 21 and 22.
Is the wiring incorrect? What could possibly be the problem? Thanks in advance.
Please!
Runs fine.
We wired up the VTEC associated wires according to a schematic I found which was as follows:
A8 - VTEC solenoid
B5 - VTEC pressure switch
B19- Knock Sensor
C8 - 2nd O2 sensor
Now, we're getting the following codes:
7, 17, 21 and 22.
Is the wiring incorrect? What could possibly be the problem? Thanks in advance.
Please!