b18a1 into 89 civic si swap questions

[onevilefcker]

alright i have an 89 civic si hatch and
i also have a 1990 integra engine and transmission,
this is what i know i need,
b-swap linkage
b swap mounts,
ecu- from 90 or 91 obd0
im preety sure i need the mt integra cv's,
can i use the wiring harness in there?
will it plug into the new ecu?
do i have to do any additional wiring
and if so what.
thanks,

 

[skillz2k5]

We did the same swap in an 88 dx but we went from auto to manual so I couldn't tell you specifics about the shift linkage but you will have to order something custom I believe. We ended up getting after market linkage and solid mounts. Also it's a pretty tight fit so you will have to beat in the frame where the crank pulley will be located. Other than that your wiring should be pretty straight forward since it's already mpfi. In fact you shouldn't have to do any wiring but dont quote me on it.

 

[ef9davejdm]

its all custom work not too hard just search forums becuase its 125 am and im not explaining lol mounts should cost prolley like 300 but search some place try and con you linkage easy on the car