B18C swap

We may earn a small commission from affiliate links and paid advertisements. Terms

EG6_down5hift

Junior Member
if i bought a OBD1 JDM B18C gsr, would i need a USDM GSR wiring harness? I heard a 92-95 civic ex/si harness will do. The car is a 94 civic dx hatch. Will the civic mount bolt the GSR? (i know i have to wire VTEC and Knock)

The IAB i heard, can be vaccuumed off somewhere, so it'll eliminate the secondary butterflies to function and get vtec better? how would i do that?
 
don't eliminate the IAB's. If you do, all that will happen is you will lose low end torque and your VTEC will bog slightly when it first switches over @ 4400
 
Originally posted by EG6_down5hift@Mar 11 2004, 06:09 PM
Will the civic mount bolt the GSR? (i know i have to wire VTEC and Knock)

do you mean what mounts?

s404ccc4f09c70.jpg


As for wiring, you may have to legnthen some of the harnesses, but there should only be 6 or 7 wires that you have to run, and they are all in one of our swap articles.
 
:concur: and you don't wanna drop the IAB homie, if you're not interesting in wiring for it then buy a skunk2 manifold
 
Back
Top