Best Turbo Cam for LS?

[projectxspeed]

I would like to use stock LS cams for my ls turbo setup. Which years featured the best cam profile in the integra family?

 

[integraslut78]

I think you want the cams from the B18A1 which is the 91-93 Integra I think, sorry I am not much help.

 

[posol]

b18b1 is the best profile non-vtec cam.

 

[projectxspeed]

Is the cam profile in the b18b the same from 94-01?

 

[AllMotorMonster]

Yes.... BUT, if you are going turbo, might I recommend these...

Stage 2 - Turbo/Super Charger specially designed specifically for forced induction applications. Features short duration, high lift for added cylinder pressure and good bottom end power. Requires kit 84162.

Crower 62403T cams

Also, if you are going to say Crower is crap blah blah blah....

This is my old dyno sheet from my stock LS engine testing Crowers prototype LS cams LONG ago!!!

 

[brian11to1]

Originally posted by pissedoffsol+Dec 16 2004, 02:33 PM-->

b18b1 is the best profile non-vtec cam.

[post=433237]Quoted post[/post]​

projectxspeed@Dec 19 2004, 08:40 AM
Is the cam profile in the b18b the same from 94-01?

[post=434372]Quoted post[/post]​

There are 3 different cam profiles for the B18B... 94-96, 97-99 and 00-01 all had slightly different cams. Ultimately the 00-01 Cams are the "best". These also came in the B20Z.

 

[projectxspeed]

That was the answer I was looking for thanks

 

[brian11to1]

¡Ningún problema debo ser una MOD!

 

[integraslut78]

Originally posted by AllMotorMonster@Dec 19 2004, 01:30 PM
Yes.... BUT, if you are going turbo, might I recommend these...

Stage 2 - Turbo/Super Charger specially designed specifically for forced induction applications. Features short duration, high lift for added cylinder pressure and good bottom end power. Requires kit 84162.

Crower 62403T cams

Also, if you are going to say Crower is crap blah blah blah....

This is my old dyno sheet from my stock LS engine testing Crowers prototype LS cams LONG ago!!!

[post=434448]Quoted post[/post]​

Damn you went all the way to SD to Group 5. That is one of the 2 places I would take my car if I lived in SD.

 

[brian11to1]

Those Dyno sheets are from Crower's Site!