Cam choices for N/A B18c
- Thread starter SpOoN EK9
- Start date
- Replies 7
- Views 1K
We may earn a small commission from affiliate links and paid advertisements. Terms
if your thinking about going stage 3's i would go with the toda spec c's...try getting the cams from one of the vendors on this site.
As of right now i've been talking with someone to build my B18c, so not sure on the compression though, just making a list of everything i need to buy first before i start spending my money. So sol, you think the skunks would be alright? someone else told me just go with Toda C's but i've also heard that they're not worth the price. Also, any of you guys have a Exedy clutch and flywheel? I'm thinking of going that route for my clutch. Just wanna know you're guys opionos on it.
Well like i said before, I like the Toda cams...and as far as the clutch goes, i have an exedy street clutch kit (pressure plate & disc) but i have a type r flywheel...i love the setup...there's a couple guys out here with 12 and 13 sec cars with exedy street clutches
act > exedy but they are 2nd in line IMO.
i personally am running skunk2 stage 2's (when they get here
) on my otherwise stock jdm gsr motor (with portflow valve train and a skunk2 IM)
toda C's are great cams- but unless you are making tons of compression, don't care about streetability, and never plan to be under 6500 rpms and are turned/valve trained up/etc to hit 9500 on a regular basis, i'd say go with the skunk stage 2's
i personally am running skunk2 stage 2's (when they get here
) on my otherwise stock jdm gsr motor (with portflow valve train and a skunk2 IM)toda C's are great cams- but unless you are making tons of compression, don't care about streetability, and never plan to be under 6500 rpms and are turned/valve trained up/etc to hit 9500 on a regular basis, i'd say go with the skunk stage 2's
integraslut78
Stylus DJ Extraordinaire
Skunk2 or Crower = 
