alicesharp
Junior Member
I bought some cams to put in my b16 B) . they are skunk 2, but they arent long enough for some reason. how do you tell them apart, they look identical...thanks
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by AllMotorMonster@Oct 19 2004, 10:57 PM
One is keyed, the other is not.
Me thinks you need a Helm manual.
[post=405013]Quoted post[/post]
Originally posted by alicesharp@Oct 20 2004, 12:17 AM
thanks guys, ok i see the keyd diference now, so im going to try to install them again tommorrow. i did a rael quick modification to make them long enough, they were like 1/4 in to smal for som wierd ass reason, but i thik got it now. thanks.
[post=405056]Quoted post[/post]
Originally posted by alicesharp@Oct 20 2004, 12:17 AM
thanks guys, ok i see the keyd diference now, so im going to try to install them again tommorrow. i did a rael quick modification to make them long enough, they were like 1/4 in to smal for som wierd ass reason, but i thik got it now. thanks.
[post=405056]Quoted post[/post]
Originally posted by alicesharp@Oct 20 2004, 12:17 AM
thanks guys, ok i see the keyd diference now, so im going to try to install them again tommorrow. i did a rael quick modification to make them long enough, they were like 1/4 in to smal for som wierd ass reason, but i thik got it now. thanks.
[post=405056]Quoted post[/post]
Originally posted by pheonixb16aguy@Oct 21 2004, 05:27 AM
lol dont do that .^^^ you should ask any one on here (www.hondaswap.com) or any other forum how to install cam shafts on your engine ... it can save you lots of time money and hassle do a alot of research before geussing on how to install a part that will not operate if not installed correctly ! thats what everyonwe is here for to help people out who dont know what there doing (and entertain and sell and yatta yattta ) but also to help people like you out.. doesnt mean your stupid just means you dont know how to put cams in .. ya gotta learn somewhere and why not this be the place to learn ! email if you questions on the install driftdreams@hotmail.com
[post=405549]Quoted post[/post]
Originally posted by webink_EK9@Oct 21 2004, 10:10 AM
all he would have to do is cut them add a washer in between them and weld them back together...that should make them reach to the end. doesn't sound too hard.
[post=405577]Quoted post[/post]
Originally posted by AllMotorMonster+Oct 21 2004, 07:09 PM-->webink_EK9@Oct 21 2004, 10:10 AM
all he would have to do is cut them add a washer in between them and weld them back together...that should make them reach to the end. doesn't sound too hard.
[post=405577]Quoted post[/post]
OMG, you have to be kidding.......
[post=405857]Quoted post[/post]
Originally posted by cycloneb18c3@Oct 21 2004, 10:00 PM
or you could put in a duct tape spacer.
i think you should send the cams back, and tell them they are the wrong ones, and get the right set.
[post=405967]Quoted post[/post]