Originally posted by VTECPOWER@Jun 19 2005, 11:10 AM Could it be code 10 and also code 14 ? The led light blinks twice so 10, which would be 20 each then 4 quick times after that.
probably 10 & 14 - do you have connectors at the right location? code 10 = IAT sensor - 2 wire connector with red/yellow and green/white wires - code 14 = EACV - 2 wire connector with blue/yellow and black wires - you should have one connector on the DX that doesn't connect to anything - 2 wire with black/yellow and orange wires
probably 10 & 14 - do you have connectors at the right location? code 10 = IAT sensor - 2 wire connector with red/yellow and green/white wires - code 14 = EACV - 2 wire connector with blue/yellow and black wires - you should have one connector on the DX that doesn't connect to anything - 2 wire with black/yellow and orange wires
i believe that they are in the right location green plug on the 1st intake runner and the clearish one near the tb. ill check when i get home and also ill talk to peter @ rywire.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.