Touge180SX
New Member
Ok, first here is the setup:
'99 Integra
OBD1 LS/VTEC
OBD1 ECU
Ok, so I'm throwing a code 17 (VSS) and my speedo and odometer are not working. Here is what I have done so far:
1. Measured ignition voltage at VSS (GOOD)
2. With VSS out and hooked to multimeter, measured for pulses when spinning by hand (GOOD)
3. Measured orange VSS single wire at back of cluster when spinning VSS by hand (GOOD)
4. Speedo moves when spinning VSS by hand
Now, here is the weird part; when I put the VSS in the tranny and jack up the front and spin the wheel, nothing! I have tried two different VSS's and two different clusters with the same results. Anyone have any ideas??!?!
'99 Integra
OBD1 LS/VTEC
OBD1 ECU
Ok, so I'm throwing a code 17 (VSS) and my speedo and odometer are not working. Here is what I have done so far:
1. Measured ignition voltage at VSS (GOOD)
2. With VSS out and hooked to multimeter, measured for pulses when spinning by hand (GOOD)
3. Measured orange VSS single wire at back of cluster when spinning VSS by hand (GOOD)
4. Speedo moves when spinning VSS by hand
Now, here is the weird part; when I put the VSS in the tranny and jack up the front and spin the wheel, nothing! I have tried two different VSS's and two different clusters with the same results. Anyone have any ideas??!?!