tylonalsnifnfool
Senior Member
So as many of you know i've been planning on doing a little bodywork on the del sol and giving it a fresh coat of paint. This is my Diary to document the whole process and keep everyone updated on my progress. I plan on keeping it the same color and eveything but The finish will be show quality (Ihope). You can find older pics of it here: https://hondaswap.com/forums/index.php?...topic=61861&hl=
and
here: https://hondaswap.com/forums/index.php?...topic=57287&hl=
I am planning on striping it down to nothing but glass and engine bay to minimize tape lines. The hood was to badly damaged from some acorn damage I decided to buy a VIS CF. I'll let the pictures and captions tell the story:
In this picture you can see the ass end disassembled, nothing special here realling just a bunch of unbolting/screwing, and a bunch of clips.
heres a pic of the front end taken aprt. i took the fender liners out after the pic. You can see all the filler on the side where there were alot of door dings. (notice the "custom" job on the front bumper support. Not me.
here is a pic of the only real dent, the resst was just dings. There is a before pic in the secong refrence link above. spoiler removed. Didn't realize it was aftermarket. B does body mods
This is just the bigger parts I removed. I plan on color matching the sideskirts and black strips on the bottom of the bumper. The black MAC box in the backround is mine. All my small parts and harddware are bagged an labeled for eay re-assembley.
I was glad after I took it apart because I didn't find any rust or hidden supprises. I barely broke any clips and didn't find any stripped or stuck bolts. I'll be posting pics every few days til its done (3 weeks or so).
and
here: https://hondaswap.com/forums/index.php?...topic=57287&hl=
I am planning on striping it down to nothing but glass and engine bay to minimize tape lines. The hood was to badly damaged from some acorn damage I decided to buy a VIS CF. I'll let the pictures and captions tell the story:
In this picture you can see the ass end disassembled, nothing special here realling just a bunch of unbolting/screwing, and a bunch of clips.
heres a pic of the front end taken aprt. i took the fender liners out after the pic. You can see all the filler on the side where there were alot of door dings. (notice the "custom" job on the front bumper support. Not me.
here is a pic of the only real dent, the resst was just dings. There is a before pic in the secong refrence link above. spoiler removed. Didn't realize it was aftermarket. B does body mods
This is just the bigger parts I removed. I plan on color matching the sideskirts and black strips on the bottom of the bumper. The black MAC box in the backround is mine. All my small parts and harddware are bagged an labeled for eay re-assembley.
I was glad after I took it apart because I didn't find any rust or hidden supprises. I barely broke any clips and didn't find any stripped or stuck bolts. I'll be posting pics every few days til its done (3 weeks or so).