Hey guys i need some advice as to what to do and how to proceed. A friend told me i could come here and get some sound advice to my current problem. I have a 1990 Honda Civic Hatchback with a 1996 SOHC ZC inside. The ECU is a PM7 but the wiring has been giving me some trouble lately. It was my plan to simply buy a new harness/wireloom and rewire the car but that is proving impossible to get or maybe its due to my geographic location i dunno. What my electrician is suggesting is using another harness and cutting and replacing the ends with the new harness but i'm not particularly fond of simply cutting the connectors and replacing them especially for long term usage.
One thought was to upgrade the ECU as i have a P76 and a complete harness along with the dizzy that goes with it and was told that could do the trick but i'm not so sure the P76 ECU is even working considering i've had it in storage for so long and it was apparently exposed to water at one point. I was told if it is working i could simply buy a new throttle body with the parts i already have and wire it using that.
I'm looking for advice or suggestions as to possible routes i could take as these old parts are really hard to find.
Was thinking to swap for a b16 but sadly i cannot find even that atm.
So please suggestions and advice. Plz and thx
One thought was to upgrade the ECU as i have a P76 and a complete harness along with the dizzy that goes with it and was told that could do the trick but i'm not so sure the P76 ECU is even working considering i've had it in storage for so long and it was apparently exposed to water at one point. I was told if it is working i could simply buy a new throttle body with the parts i already have and wire it using that.
I'm looking for advice or suggestions as to possible routes i could take as these old parts are really hard to find.
Was thinking to swap for a b16 but sadly i cannot find even that atm.
So please suggestions and advice. Plz and thx