FS:D series and Turbo parts..

[K2e2vin]

Anyway to verify the cam is a regrind? Like did they etch any numbers on it, etc.? LMK, I'm very interested.

 

[xRONINSxROGUEx]

I just noticed a four letter code that i've never seen on it before.. Its D224 and its on the non cam gear end of the cam.. I'll call webb and see if they can indentify it by that..

 

[K2e2vin]

D224 is the stock serial number; they all have a 3-digit number beginning with B, C, or D(mine says B228). I guess best way to find out is have it measured by some shop or yourself with calipers(lobe max height vs. base circle)..

 

[sevenhillsbilly]

welli looked on webbs website and they only have 3 differnt grinds for the d series cams so its gotta be one of them if you go look at them you can see what your options are

 

[K2e2vin]

welli looked on webbs website and they only have 3 differnt grinds for the d series cams so its gotta be one of them if you go look at them you can see what your options are

There's infinite possibilities if it's a Web cam; you obviously looked at the wrong engine. For the Z6, they only show the option for a custom profile. The non-VTEC SOHC's have like 4 different options. Bisi(Bisimoto) also gets his regrinds from Web although I believe they're custom profiles.

 

[xRONINSxROGUEx]

Well in that case i'll get it mearsured.. I have a friend that works a machine shop who can do it for me..

 

[sevenhillsbilly]

well ok then that shoots my comment outat the water haha

 

[SPEEDFREAK0920]

i will take the hf mani. whats your paypal address? pm me or e-mail me asap speedfreak0920@aol.com thnx

 

[xRONINSxROGUEx]

Bump..