AllmotorCRX161
Member
Im selling my Fully Built ITR Motor. The motor started off as a 2000 Integra Type R. The bottom end was taken apart, and the block was Hot tanked, Bored over .25 (81.37mm) and JDM ITR pistons were installed. The rods were then Shotpeened and the crank was balanced and knife edged. As for the head, there was a Port and Polish on the head, and a match port and polish on the intake manifold. Also there is Skunk 2 Valvetrain throughout the head, and to top it off a set of JUN 3 Camshafts. The Stock type R throttle body was taken off and bored out to a 70mm. There is also a DC 4-2-1 header. As for the transmission, it is JDM Y1 cable tranny with stock LSD, the stock LSD was taken out and replaced with a Quaife LSD. There are only 1000 miles on the entire motor since rebuilt and 1000 on transmission. I have over 9600 dollars into this motor. Im asking 4300 for the complete motor. Please email me with any questions