Stleger184634
New Member
Hey I was wanting to know where you can get a clutch cover/ transmission plate for a f20b? Does anyone know of is there a model that would fit it?
help please
- Thread starter Stleger184634
- Start date
- Replies 8
- Views 1K
We may earn a small commission from affiliate links and paid advertisements. Terms
Stleger184634
New Member
this is a link to show what plate i am talkin about
thanks
http://img.photobucket.com/albums/v...bo Setup/Installation/howto/flywheelcover.jpg
thanks
http://img.photobucket.com/albums/v...bo Setup/Installation/howto/flywheelcover.jpg
MthaFuknGreen
Green on the scene.
junkyard.
hondaautomotiveparts.com
your local honda dealer.
hondaautomotiveparts.com
your local honda dealer.
Stleger184634
New Member
thanks guys i ended up just taken one from a h22 and cutting the eye hole on the right side so it fit past the oil pan and it works great but now i have a real problem my fuel pump will not come on, checked all the fuses and the wiring. it has spark from the dizzy thinkin maybe there is no power to the ecu but my friend that is working on it with my forgot his multi meter so we are gonna have to get it later but as for right now any suggestions on what it might be?
Stleger184634
New Member
Ok so...
update:
Car has no spark and is getting no fuel/power to injectors, we have taken apart the main relay and we jumped the fuel pump and it works so that is not the problem and we did continuity test on the main relay it tested ok, did continuity between the relay and ecm once again fine, for some reason there is no power coming past the main relay. I dont know what is goin on since it checks out fine its connected to ecm it everything is properly wired and grounded. I have oredered a obd1 converison harness and have a p13 to use with it but tht wont be here for 5 days, and I am not sure if that will be able to solve my problem does anyone have any input on the situation?
update:
Car has no spark and is getting no fuel/power to injectors, we have taken apart the main relay and we jumped the fuel pump and it works so that is not the problem and we did continuity test on the main relay it tested ok, did continuity between the relay and ecm once again fine, for some reason there is no power coming past the main relay. I dont know what is goin on since it checks out fine its connected to ecm it everything is properly wired and grounded. I have oredered a obd1 converison harness and have a p13 to use with it but tht wont be here for 5 days, and I am not sure if that will be able to solve my problem does anyone have any input on the situation?
Stleger184634
New Member
yah we did all of tht checked all grounds and went over all the plugs like 5 times ill prolly just see what i can do once i go obd1 but i will prolly have to buy a new relay cuz i cant figure it out the relay has power and continuity but it will not trasnfer power
Similar threads
