my car = 93 civic ex coupe
my engine = 98 1.8l integra gsr
my engine harness = obd2
my ecu = obd1 p28 and obd1 p72
my distributer = obd2
**discription**
well i put my engine in my car.... wired all knock sensors and everything else like that from the instrutions on www.hondaswap.com (all except the iab wich we have yet to plug into the actuall sensor we have run the wire to my ecu).... plugd up engine harnes.... and what the heck it wont start up.... the starter motor turns over the engine everything else seems to check out fine but the distributer dont spark.... we testd the distrib. on a friends car and it workd perfectly but it wont work on my car plus my engine harness looks a lil wierd where the harness plugs in on the passenger side of the engine bay there are 4 plugs on the engine harness but my car only has 3 plus that go to the ecu.... what the heck.... we have lookd in books and we think those are the engine crank blabla bla something hehe but we dont know how to wire those.... so lil help ther plz well i dont know what else to say maybe someone here could plz help me out help plz this is our first swap ever
my problem = distributer not working (wont spark)(yes the coil is good....)
plz help as soon as posible this is an emergancy on our part.... we dont have the money to get someone to check it out and hasport doesnt sell engine harness for ex 93.... help
ps this is a usdm engine not jdm if that means nething
my engine = 98 1.8l integra gsr
my engine harness = obd2
my ecu = obd1 p28 and obd1 p72
my distributer = obd2
**discription**
well i put my engine in my car.... wired all knock sensors and everything else like that from the instrutions on www.hondaswap.com (all except the iab wich we have yet to plug into the actuall sensor we have run the wire to my ecu).... plugd up engine harnes.... and what the heck it wont start up.... the starter motor turns over the engine everything else seems to check out fine but the distributer dont spark.... we testd the distrib. on a friends car and it workd perfectly but it wont work on my car plus my engine harness looks a lil wierd where the harness plugs in on the passenger side of the engine bay there are 4 plugs on the engine harness but my car only has 3 plus that go to the ecu.... what the heck.... we have lookd in books and we think those are the engine crank blabla bla something hehe but we dont know how to wire those.... so lil help ther plz well i dont know what else to say maybe someone here could plz help me out help plz this is our first swap ever
my problem = distributer not working (wont spark)(yes the coil is good....)
plz help as soon as posible this is an emergancy on our part.... we dont have the money to get someone to check it out and hasport doesnt sell engine harness for ex 93.... help
ps this is a usdm engine not jdm if that means nething