getting a code 6, ect
so first off..the car is a 89 crx HF with a obd0 b16 swap. i did a search and i found the info on the faq about getting a resistor and plugging it in to see if the problem is with the sensor or the wiring. well i got the resistor (330 ohm 1/2 watt spec, or one from Radio Shack part# 271-1113) and i still get a cel 6 and bad idle. i also have the factory service manual for the crx and i went through the process of testing with a multimeter. and the wiring seems to be alright. i get 5v's on the red wire and i get 5v's between the red and green wire on the ect. i finally broke down and bought a new ect and tried that....still getting a cel!!!! one thing that did turn the cel off was when i restarted the car after it was already warmed up...i guess because the car doesn't look at the ect after its warm? i'm not sure. can anyone help??
so first off..the car is a 89 crx HF with a obd0 b16 swap. i did a search and i found the info on the faq about getting a resistor and plugging it in to see if the problem is with the sensor or the wiring. well i got the resistor (330 ohm 1/2 watt spec, or one from Radio Shack part# 271-1113) and i still get a cel 6 and bad idle. i also have the factory service manual for the crx and i went through the process of testing with a multimeter. and the wiring seems to be alright. i get 5v's on the red wire and i get 5v's between the red and green wire on the ect. i finally broke down and bought a new ect and tried that....still getting a cel!!!! one thing that did turn the cel off was when i restarted the car after it was already warmed up...i guess because the car doesn't look at the ect after its warm? i'm not sure. can anyone help??