goldgreen90ef
goldgeen90ef
i have a pw3 ecu running my b16 swap, and i want to chip it. i want it to only look for one 02 sensor, lower the vtec, and raise the redline. whats a good company to do this??,,,and i dont want to go obd1,thanks
jdm pw3 ecu, chipping options...
- Thread starter goldgreen90ef
- Start date
- Replies 3
- Views 1K
We may earn a small commission from affiliate links and paid advertisements. Terms
Have you done anything to the motor? And with OBD2 I'm not too sure if you could get away with it looking at 1 O2 with out possibly maybe an O2 simulator, but I could be wrong. As far as raising the redline, if theres not really done, is there really any reason to be going into it? -Gary
does that ecu even exist? you sure you aren't mistaking it for a pr3 or a pw0?
couple more points, if you lower the vtec, you will be slower, if you raise the redline you'll blow your motor... that is if your motor is still stock.
couple more points, if you lower the vtec, you will be slower, if you raise the redline you'll blow your motor... that is if your motor is still stock.
goldgreen90ef
goldgeen90ef
yeah. sorry it is a pr3, the main thing i want to do is have the ecu look for one o2 sensor, any suggestions, thanks
