LS/VTEC swap

We may earn a small commission from affiliate links and paid advertisements. Terms

chris1405

New Member
Whats up guys I am currently building a ls/vtec engine and am wondering what parts i will need to swap it into my 96 civic hx. Also any parts that I am missing. Also i was wondering if i could use the wire harness from the d16y5.

What I have:
b18b1 block darton sleeved by ERL performance
Manley turbo tuff rods
forged wiseco pistons
ls crank
stock GSR head
oil pan
golden eagle ls vtec conversion kit
gsr oil pump
gsr water pump/gasket
oem belt tensioner
oem cam shaft seal
oem crank shaft seal
gates racing timing belt
ACL race bearings
84mm cometic head gasket
ARP head studs/ rod bolts/
Skunk2 pro series intake manifold/gasket
68mm Skunk2 throttlebody/gasket
450cc injectors
alternator
dizzy
tr-y headers
walbro 255 fuel pump

to be ordered/picked up
hasport motor mounts
axles
half shaft
blox throttle position sensor
fuel pressure regulator
gsr valve cover gasket/seals
gsr tranny
act stage 4 clutch
flywheel
 
Unless I missed it you will need to get a b series ecu. A 96-98 GSR ecu will fit your current obd2a wiring or you could get a a obd2 to obd1 harness with a p28 ecu. FYI the swap will still be able to run on your current ecu but wont be as quick.
 
Back
Top