odb-0 to odb-1 cross over

[Dark91zc]

what do i need to change to make my engine bay odb-1???

 

[brian11to1]

are you asking about an OBD conversion? basicall you go here and search for obd conversion harnesses. then you get OBD1 injectors, ECU, dizzy and do the converison.

 

[Dark91zc]

what is the difference in odb-0 injector to odb-1 injector

 

[brian11to1]

OBD0 has an injector resistor box and they are peak and hold
OBD1 doesnt have a resistor box and they are saturdated.

 

[JKOBD.com]

Originally posted by brian11to1@May 29 2005, 11:19 AM
OBD0 has an injector resistor box and they are peak and hold
OBD1 doesnt have a resistor box and they are saturdated.

[post=504966]Quoted post[/post]​

Yes. Also, FYI, you do not need to convert to OBD1 injectors when you go to an OBD1 ecu setup. You can retain the pre-obd (OBD0) injectors and the resistor box and it will be perfectly fine.

Jason
www.JKobd.com

 

[brian11to1]

I knew that, but I didnt know the details. plus wouldnt it be beneficial to convert to the OBD1 injectors?

 

[Som1Dies2Nite]

When goin to OBD-1...the OBD-0 injectors can still be used if the resistor box is used..Am I right? If I decide to use OBD-1 injector, then they can be wired direct?

 

[brian11to1]

I think so, yes.

 

[ripperbone]

Originally posted by Som1Dies2Nite@May 31 2005, 10:29 PM
When goin to OBD-1...the OBD-0 injectors can still be used if the resistor box is used..Am I right? If I decide to use OBD-1 injector, then they can be wired direct?

[post=505942]Quoted post[/post]​

if you use obd1 injectors then yes they can be wired direct