question about my build

[DoinWork]

bl6 block itr crank rods and pistons
itr head, toda everything
basic bolt-ons
will this net me 200whp with tuning and the right ecu?

 

[exospeed*com]

Originally posted by DoinWork@Feb 24 2005, 06:29 AM
bl6 block itr crank rods and pistons
itr head, toda everything
basic bolt-ons
will this net me 200whp with tuning and the right ecu?

[post=465493]Quoted post[/post]​

it wont. the b16 setups will need more compression and a more built head setup.

B18 and LS/VTEC setups are known to make 10-20hp more than similar b16a setups.

 

[97CTR]

well first off, have fun trying to put an itr crank rods and pistons in a b16 block. won't happen. If you meant a b18 block and toda C's a good header then maybe 200

 

[posol]

itr internals in a b16 block = oooops, my piston just went through my head.

 

[pills_PMD]

agreed. and 200 whp out of a b16 is not an easy task.. too much money for what its worth. look into that b18 block. i netted an addition 30 ft-lbs of tq and 20 whp just by swapping the block.. no change in the head or other bolt ons...

 

[DoinWork]

I was just trying to make the most power out of a b16.
My friend got an almost similar setup,if any of you from jersey then you know who dennis is...

I have an ls block but i know the b16 will happen the high-revs allday...


Thanks for the input

 

[SlushboxTeggy]

Originally posted by DoinWork@Feb 25 2005, 12:46 AM
My friend got an almost similar setup,if any of you from jersey then you know who dennis is...

[post=465945]Quoted post[/post]​

im from jersey and i dont know any dennis. where in nj?

 

[92civicb18b1]

yea me either.

 

[DoinWork]

Dennis the hillside cop... You must not know the street scene, he ran 12.1's all-motor... now he's running 10's in his turbo hatch... byt and drt put it together...