radiator and hoses

  • Thread starter Thread starter formby
  • Start date Start date
  • Replies Replies 8
  • Views Views 964

We may earn a small commission from affiliate links and paid advertisements. Terms

formby

learning in progress
so i'm getting ready to start buying things for my turbo kit...

the first thing i need is a half size radiator and new hoses (for looks)

so i saw this for a delsol
1290.jpg


for $105

then i saw these for a 88-91 civic
RH03%203.jpg


for $52
these are not the best products but they do the trick.. are they what i need?

my question is what hoses do i need to fit the half sized radiator....i know i have to slant it towards the engine...but i know nothing about the hoses...

right now i have a 90 teg rad and hoses
 
Originally posted by B16CRX@May 9 2005, 03:34 PM
you need the hoses that go with the radiator. (the year civic or del sol it came from)
[post=497078]Quoted post[/post]​

wrong, cause he has a motor swap in his car
you need ones from a integra
 
i already have those..i just want red hoses and the only sell them in pairs for specific aplications
 
Originally posted by formby@May 9 2005, 08:13 PM
i already have those..i just want red hoses and the only sell them in pairs for specific aplications
[post=497169]Quoted post[/post]​

go to a autoparts store and check the difference in the lower radiator hose to see if there different and if not the but the matching set for the gsr
 
Originally posted by ripperbone+May 9 2005, 04:49 PM-->
@May 9 2005, 03:34 PM
you need the hoses that go with the radiator. (the year civic or del sol it came from)
[post=497078]Quoted post[/post]​

wrong, cause he has a motor swap in his car
you need ones from a integra
[post=497092]Quoted post[/post]​


actualy he can use the civic hose in his swapped car. I am using teh civic lower and teg upper in my b16 crx. I had to trim teh teg upper about 2 inches to make it not kink.
 
Back
Top