Hi there,
I have a '92 EG8 civic (D15B2 engine) and a week ago my buddy totaled his car. Now i can buy the engine and the tranny with everything else i need to do the swap, altough, it is not a conventional thing in my area to do things like this, so i have no written resources, and i really need your help!
So far i'd figured out that i'll need the fallowing thingies to make the B16A2 swap into my EG (please warn me if i'm wrong!)
Thingies for the swap:
- Complete B16A2 engine with tranny
- I can use the B-series motor mounts
- I can use the 96-01 GSR or ITR harness to get OBD2->OBD1 wires with OBD2 plugs and OBD1 connector to the ecu (is it?)
- I can use a P30 ecu without modding
- I can use a 94+ Integra (not Type-R) shift linkage, or the linkage came with the B16A2 engine
- I have to do some work with the O2 sensor (4 wire conversion for the P30, but i have no idea what to do with the two O2 sensors - one before the cat, one after the cat. maybe using only one is a solution. dunno.)
- I have wiring diagrams for the ecu (IAT, Knock sensor, VTEC, please warn me about the bottlenecks of the procedure =))
- I can use the axles coming with the B16A2
- radiator hose from a VTEC Del Sol (i'm digging hard u see =))
- throttle body from the B16A2
TO DO for the check-up:
- check or replace the timing belt
- check or replace the water pump
- check or replace the dirtributor parts
- check the sparkplugs
- check the valve clearences
This is what i have so far. The info are far from sure for me, so even if you can say: 'ok, you can do that, i know' i'll be happy. Correct me please in any detail, coz i'd *really* like to do this swap. Any minor changes and suggestions worth time and $$ of corse. =) Don't hesitate to go into details. =)
Great thanks for your help!
- Asin
I have a '92 EG8 civic (D15B2 engine) and a week ago my buddy totaled his car. Now i can buy the engine and the tranny with everything else i need to do the swap, altough, it is not a conventional thing in my area to do things like this, so i have no written resources, and i really need your help!
So far i'd figured out that i'll need the fallowing thingies to make the B16A2 swap into my EG (please warn me if i'm wrong!)
Thingies for the swap:
- Complete B16A2 engine with tranny
- I can use the B-series motor mounts
- I can use the 96-01 GSR or ITR harness to get OBD2->OBD1 wires with OBD2 plugs and OBD1 connector to the ecu (is it?)
- I can use a P30 ecu without modding
- I can use a 94+ Integra (not Type-R) shift linkage, or the linkage came with the B16A2 engine
- I have to do some work with the O2 sensor (4 wire conversion for the P30, but i have no idea what to do with the two O2 sensors - one before the cat, one after the cat. maybe using only one is a solution. dunno.)
- I have wiring diagrams for the ecu (IAT, Knock sensor, VTEC, please warn me about the bottlenecks of the procedure =))
- I can use the axles coming with the B16A2
- radiator hose from a VTEC Del Sol (i'm digging hard u see =))
- throttle body from the B16A2
TO DO for the check-up:
- check or replace the timing belt
- check or replace the water pump
- check or replace the dirtributor parts
- check the sparkplugs
- check the valve clearences
This is what i have so far. The info are far from sure for me, so even if you can say: 'ok, you can do that, i know' i'll be happy. Correct me please in any detail, coz i'd *really* like to do this swap. Any minor changes and suggestions worth time and $$ of corse. =) Don't hesitate to go into details. =)
Great thanks for your help!
- Asin