formby
learning in progress
long story short
i dont want to spend more money on anything to make my 300-350 hp goal. and i know that my d series will make it there if i build it right.
So i'm selling the LSV with tranny as a swap
ENGINE IS INTACT WITH TRANNY ATTACHED
parts list
this engine was run in an OBD0 configuration
[2k miles on engine since rebuild]
81.5mm stock block
ARP rod bolts, Head studs
oem HG
oem lightened flywheel
KMS block guard
2000 SI head
oem IM/TB
Si int cam
GSR exh cam [ i have the SI int cam]
OBX cam gears [6bolt] they work great
OBD0 oem injectors cleaned by witchhunter.com
STR cam plug
ITR oem oil cooler
GSR oil/water pumps
FOCUZ header
exedy 3puck sprung clutch & pressure plate
CABLE B16 tranny no grinds [used syncromesh fluid]
90-93 TEG axles with half shaft
OBD0 starter and alternator included
THIS ENGINE DOES NOT HAVE:
WIRING HARNES, O2 SENSORS, ECU, DISTRIBUTER, LINKAGE
ASKING
$2,500 + shipping
MY ZIP IS 32837
THIS ENGINE WAS BUILT BY J&Y MACHINE SHOP IN KISSIMMEE FL
I ALSO HAVE THESE ITEMS FOR SALE
if i sell the engine
ALL ARE NEW NEVER USED
UNLESS STATED
81.5mm cometic lsvtec HG $50 shipped
OEM b18c5 valvve cover gasket set $45 shipped
polished b series valve cover [no wire cover] $90 shipped
OEM oil pan gasket $14.98
1999 civic si AC/PS & T bracket. $70
moroso oil pan $143 shipped
OBD2b SI distributer $167 shipped
silicone valve guides $89 shipped
B SERIES hydro to cable mount $179 shipped
LIKE NEW
EAGLE Hbeam rods for LS B18 a/b $250 shipped
they have been resurfaced to like new
LS SHORT BLOCK $200 might need rebuild
OBD0 MSD CAP vtec/nonvtec $15
OBD0 distributer DOHC VTEC...new coil/cap, rotor $35 ea OBO
TOKIKO BLUE set $200 2k miles
H&R sport springs $99 2k miles
1990 integra complete disk brake conversion F&R $190
includes pads, rotors calipers, rear arms, brake cable
1991 non rolling crx shell NO rust, dash, plastics,harness, carpet $250
i dont want to spend more money on anything to make my 300-350 hp goal. and i know that my d series will make it there if i build it right.
So i'm selling the LSV with tranny as a swap
ENGINE IS INTACT WITH TRANNY ATTACHED
parts list
this engine was run in an OBD0 configuration
[2k miles on engine since rebuild]
81.5mm stock block
ARP rod bolts, Head studs
oem HG
oem lightened flywheel
KMS block guard
2000 SI head
oem IM/TB
Si int cam
GSR exh cam [ i have the SI int cam]
OBX cam gears [6bolt] they work great
OBD0 oem injectors cleaned by witchhunter.com
STR cam plug
ITR oem oil cooler
GSR oil/water pumps
FOCUZ header
exedy 3puck sprung clutch & pressure plate
CABLE B16 tranny no grinds [used syncromesh fluid]
90-93 TEG axles with half shaft
OBD0 starter and alternator included
THIS ENGINE DOES NOT HAVE:
WIRING HARNES, O2 SENSORS, ECU, DISTRIBUTER, LINKAGE
ASKING
$2,500 + shipping
MY ZIP IS 32837
THIS ENGINE WAS BUILT BY J&Y MACHINE SHOP IN KISSIMMEE FL
I ALSO HAVE THESE ITEMS FOR SALE
if i sell the engine
ALL ARE NEW NEVER USED
UNLESS STATED
81.5mm cometic lsvtec HG $50 shipped
OEM b18c5 valvve cover gasket set $45 shipped
polished b series valve cover [no wire cover] $90 shipped
OEM oil pan gasket $14.98
1999 civic si AC/PS & T bracket. $70
moroso oil pan $143 shipped
OBD2b SI distributer $167 shipped
silicone valve guides $89 shipped
B SERIES hydro to cable mount $179 shipped
LIKE NEW
EAGLE Hbeam rods for LS B18 a/b $250 shipped
they have been resurfaced to like new
LS SHORT BLOCK $200 might need rebuild
OBD0 MSD CAP vtec/nonvtec $15
OBD0 distributer DOHC VTEC...new coil/cap, rotor $35 ea OBO
TOKIKO BLUE set $200 2k miles
H&R sport springs $99 2k miles
1990 integra complete disk brake conversion F&R $190
includes pads, rotors calipers, rear arms, brake cable
1991 non rolling crx shell NO rust, dash, plastics,harness, carpet $250
Last edited: