Vtec not working HELP

  • Thread starter Thread starter civic32958
  • Start date Start date
  • Replies Replies 2
  • Views Views 2K

We may earn a small commission from affiliate links and paid advertisements. Terms

civic32958

Junior Member
I have a 95 EG hatch with a b16a2 swap. Had a turbo on it and it blow the bottom end. Ordered a new bottom end from a website, the guy said it was a b16a2 , everything fits and runs except rear motor mount is about 1 inch off.Double checked vtec wiring and manual powered up vtec sloneid and it works, also tryed another computer and it does not work. Now with everything on and running turbo too, everything works except the vtec. if someone could help maybe i got a b16a1 , and why doesnt the vtec work?? HELP
 
usdm 99-00 civic si = b16a2.

most of the population are idiots and call the JDM b16a sir2 as it as well, but its, not. the rear mount on the civic si is not the same as the sir2.

if you don't have vtec, check your oil pressure
 
I have an JDM B16a Sir2 and used a 99-00 Si rear mount, and it worked fine... bolted up perfectly and my engine sits straight. BTW, it's in a 97 civic
 
Back
Top