Wheel size 245x35x17 (rear) for my Prelude 4th gen
- Thread starter Atrevido
- Start date
- Replies 8
- Views 3K
We may earn a small commission from affiliate links and paid advertisements. Terms
245 is freakin wide dude.
first off, i hope your wheel is at least a 17x9 or 17x9.5. any less than that, and you're going to be floppy.
while i have no idea if it will clear a lude (i'd still put $50 on it not working) the offset of the wheel along with the width, as well as how low you are, and if your fenders are rolled or not come into play.
if you kick them out with enough offset, you can clear the suspension on the inside, but then you need to cut and get custom fenders on...
and the ass end is wide as Rosanne.
the real question is, WHY? and what's on the front?
if you don't have a 245 on the front too, you're going to push like a mofo.
if you're doing this for show, try superhonda.com.
first off, i hope your wheel is at least a 17x9 or 17x9.5. any less than that, and you're going to be floppy.
while i have no idea if it will clear a lude (i'd still put $50 on it not working) the offset of the wheel along with the width, as well as how low you are, and if your fenders are rolled or not come into play.
if you kick them out with enough offset, you can clear the suspension on the inside, but then you need to cut and get custom fenders on...
and the ass end is wide as Rosanne.
the real question is, WHY? and what's on the front?
if you don't have a 245 on the front too, you're going to push like a mofo.
if you're doing this for show, try superhonda.com.
