ZC tranny

We may earn a small commission from affiliate links and paid advertisements. Terms

benfx666

Junior Member
Hi, i have a d16 obd0 with automatic tranny with a pg7 obd0 in my civic 90

my problem is : the reverse on the tranny is broken...and i have on my hand a
zc tranny obd1 Automatic with midshatf.....

I want to know if i can do the swap or i need to change the ecu
and i want to know for the axles
 
Originally posted by benfx666@Aug 26 2005, 10:01 AM
Hi, i have a d16 obd0 with automatic tranny with a pg7 obd0 in my civic 90

my problem is : the reverse on the tranny is broken...and i have on my hand a
zc tranny obd1 Automatic with midshatf.....

I want to know if i can do the swap or i need to change the ecu
and i want to know for the axles
[post=545590]Quoted post[/post]​



SWAP IT..

you will need the 90-93 teggy axles.
Or, put a standard in that bastard while you can.
 
thank for this info ,

on my 0bd0 tranny i have only 1 connector the AT Lockup control solenoid valve

now, on my 0bd1 zc tranny i have 2 connector....the 2p AT Lockup control solenoid valve and the 3p speedometre sensor connector

what i do whit the speedometre sensor connector????
 
Back
Top