Recent content by 89b18a1

I think i found out why my b16 wont start because i used the b16 engine harness so my question is can i switch back to my dx harness without pulling the motor back out cause thats going to be a bitch

also could i just rewire the b16 injector harness to because the one with the mpfi done to it is tore all to hell and so if i do the b16 just like that would it work. also is the colors for the dizzy i need to tap blue yellow blue green for cylinder position plug because the one i have from king...

the Motor is obd 0 i have a new obd 0 dizzy from king distributors do i wire it up before the plug or after it is just the two sensors for c1 and c2 right it will not fire up it just will crank for days but no start how many grounds is there on the b16 im thinking that it have to be one of them...

Here is the deal i swapped in a b16 sir in for my old b18a so now it will not start it cranks it was two wires from the dizzy that i cut and 4 running to the firewall i cut also was this for mpfi conversion the car is a dx so does this have anything to do with the car not cranking if so i know i...

BUMP HELP

Here is the deal i swapped in a b16 sir in for my old b18a so now it will not start it cranks it was two wires from the dizzy that i cut and 4 running to the firewall i cut also was this for mpfi conversion the car is a dx so does this have anything to do with the car not cranking if so i know i...

whats up guys, i have a 89 civic dx hb that has a b18a1 in but spun rod bearing so after consideration i bought a b16a long block from hmotorsonline because the b18a already had a b16 tranny so my question is is it any thing else i need for this swap to go right i already bought the dizzy and...

Thanks alot for your help.

i have a question i have a b18a1 i found out that i have cracked block so i was wondering can i switch blocks with a 96 b18b and would it bolt stright up and work or would i have to find a b18a1 cause my head is in perfect working order I want to get this car on the road real soon. Thanks

i went to the acura dealership to get new rod bearings for my car and they asked me what color do i need they say its the same for rods when you buy them my question is how do i know what color they are they say they have different colors red blue pink and so on what are they talking about.

If it's a bearing knocking would that have done enough to the motor to make me replace with another,or would it be better to fix the one i have now. p.s. does anyone have a b18a1 or b18b that you want to sell it has to be in working order cause i want to get this car on the road name price with...

whats up guys im new to the board so i have a 89 civic hb dx with a b18a1 swap in it and i bought it from a guy like that and when it was being driven back it gave out i dont know what happen because i was in the car in front i had no license at the time lost it but so i get it towed to the...