Recent content by taasoek

where can i find a p72 spoon bin file that is capable with uberdata 1.70 or who has the bin file that they would like to share.....i am goin to program my own chips and want a relyable bin file........reply asap thanx

i have a 93 integra ls and it was recently stolen and took my distributer as well and they cut off distrbuter harness from my engine bay harness.....i wanted to put a distributer from a 90 integra ls and want to know the wiring schematics for them or if its possible to use that distributer in...

i was woundering if b16a2 cams would make any power difference if it is put onto 98 gsr head......i am running lsvtec .......reply asap...thanx

i found out that my motor has a vaccum leak and was woundering how would i find out where it is from....reply asap...thanx

i forgot i also tried another throttle body on it too and it did the same thing....

i have a gsr head on an ls block....when i start the car it idles at 2000rpm and doesnt go down when it is warmed up...... i tried adjusting the idle but it doent make and difference.....i also checked the vaccum and that seems fine....what else can be the problem...help!

i dont think its the throttle cable because it is loose enough where theres no tension....

i have and ls vtec in my 96 civic and is running obd1....i need help adjusting my idle....how do i fix that.....i tried turning the screw on throttle body all way down...but the only helped a little bit....if any tips reply asap....thanx

I have a 96 honda civic and has an ls vtec obd1....i have a conversion harness for the obd2 to obd1.....i am trying to convert my alternator 4 wire plug but dont know which wire goes where.....i have a 4 wire alternator plug from a 93 civic that fits the alternator i am trying to put in......i...

how can i wire my obd1 harness to my obd2 harness....

its a obd2 gsr head

i have an ls vtec in my 96 civic.....what throttle cable do i use? reply asap.....

what do with the engine bay harness if im putting a gsr obd1 into my 96 civic ex and im going to use a p28 chipped ecu with ecu conversion harness.....do i need to wire anything for the butterfly valves or any thing else.....reply asap....