Search results for query: *

i just put a b16 in my civic, ive got a p28 if you need one,,let me know, also coming soon, a p30

so this is efecting my performance??? do you have the correct one that is chipped, or know some where or someone i can get it from??? ive got a p28 also if some one had a chipped p30 i would trade both of mine for it. thanks

ok, this is whats up, ive got a 95 civic with a sir II swap in it. it came with a p 30 ecu. it runs fine, but i have a good intake header n exhaust and a few other things like plugs n wires. ne ways, i put the computer on it yesterday and it is throwing a lock up converter code or some shit. it...

im running a p 30 ecu in my 95 civic, it seems to work very well, all though the rev limits at about the same as the p 28. cant say as to the top speed yet, just got er goin yesterday.

chip it, yhen you will have all around gains. look at the side of your ecu, there will be numbers in the middle like p75 or something, order the chip for that ecu n your car.

if he ran a p30 ecu would you have to change any of the wires where it plugs in to the ecu?? then just plug the knock sensor lead in to um, is it d3? cant remember, ne ways.thanks

well, ive got a 94 civic with a sir II swap. it has a p 30 ecu. what do i need to do to make this baby run? by the way the car is an ex, so already wired for v tec, right?? thanks guys

just wonderin how hard it is to chip an ecu. ;)

not a prob man just got the sir 2 in my ride so im learnin more all the time too

ive got a 4-1 header, test pipe(resonator style) and a tsudo cat back 2.5 diameter fire ball style stainless from the header to the bumper with silencer. not much on low rpms, but tugs like a bastard from bout 4,500 to 7,500 bout 600.00 for every thing on ebay, not bad huh??

thank you guys!!!! :D :worthy:

COULD NE ONE TELL ME THE EASIEST WAY TO HOOK UP AMN AFTERMARKET TACH IN MY 95 CIVIC W/ SIR2 SWAP, I HAVE NO AFTERMARKET IGNITION. IM CONFUSED HERE, THANKS ;) ALLS I NEED TO KNOW IS WHERE TO RUN THE SIGNAL WIRE THAAAANKKK YOOOOUUU|!

LOOK GUY, IM NEW AT THIS OK, I WAS JUST LISTENIN TO WHAT THE SELLER HAD TO SAY, JUST CAUSE YOUR PISSED AT YOUR SELF DONT MEAN U GOTTA BEPISSED AT EVERY ONE ELTSE TOO, I THOUGHT THATS WHAT THIS SITE WAS HERE FOR IS TO LEARN <_<

ok, thanks for clearin that up for me, so it is just the ecu that i have to repin right??? :worthy:

ok, thanks man, what year del sol do i order them for when i do??? :worthy:

i noticed when gettin ready to hook the stock linkages up to my manual b16 swap that my linkage that bolts to the side of the tranny seems to be too short, but the one that does the shifting seems to be fine, can i just lengthen it??? thanks!!!

also the computer that came with my motor plugs right in to the stock harness, if that helps any :unsure:

um, we alreadt swapped the harness over from my old motor to the new one, every thing plugged right in , no left over wires or ne thing. i thought alls i had to do was pin out the ecu plug now,?? im kinda lost, but all of the colors were the same from plug to plug n harness to harness :huh:

i belive it is a p28, but how do i know for sure??? <_< thank you for the wiring hints by the way

:angry: ok, yhats what he said bout it ne ways, i dono any thing about it, i purchased it from www.jdmpower.net they have a lot of motors online and in the back of super street. i finally got ahold of him today, he said he was on vacation, and remembers nothing of our last conversation of...