My boy got a 99 honda accord and he wants to do a swap maybe a h22 or h23
let me know what would be the best swap and what will fit.
let me know what it would take to do
i have a 93 ls in a 1990 hatch . i have already done the dualpoint to multipoint( i did it the right way to i got a custom harness from hasport cost me a lot of money to like $315 with the cost of the a uncut dx harness and an uncut obd-0 ls(91) harness)
my motor runs but only on 1 cylinder(...
have you tried the axles through the hubs because you you usually have to change them as for the map sensor i used one out a 91 integra and wired the purge valve and map sensor in to my ecu
this may not help but it may
oh my swap was a 93 ls into a 90 dx there may be small differeces between...
well when trying to turn over my motor i burned up my starter so i am guessing that a power wire is grounding out somewhere my grounds started smoking and everything so how do i locate all the power wires?
i have a 93 ls mounted and ready to go in a 90 dx hatch
i bought a custom harness from hasport so i wouldnt have to do the dual point to multipoint wiring but i cantget it to start i changed injectors and dizzy but it wont start the guy that owned my hatch before me relocated the battery to...
get a custom one from hasport or ebay would be the best way to go but if you feel like doing the modification you could get a ls shift linkage and cut to make it shorter not sure on how much shorter it needs to be i believe it is 2 5/8" but im not sure so dont quote me on that
do search on dualpoint to multipoint there are two wires that you need to run from ecu pins b10 and b12 these wires are you crank angle position sensor wires there will be a blue/yellow and a blue/green im not sure which wires go to which pins thats why you need to do a search
does abs have to do with the motor or with the car i need to know quick car has to be done soon thats all i am lacking does 90 dx hatch have abs or what
I put a 93 ls in to a 90 dx hatch when i go to get axles (90-91 ls axles) they ask if i got abs and i dont know does it matter or can you tell me if i do or dont have abs thanks for your help
i put a 93 ls motor in to a 90 dx hatch do i know i got to change dizzy to obd0 will a dizzy off of a 89 teg work and then injectors since i had to rebuild motor harness can i just solder those plugs on the harness so that i can use them or do i have to get obd0 injectors?????
i have a 90dx with 93 ls swap(not running due to wiring issue)( already converted from dual point to multi point) needs axles
2004 civic blue with fade 18inch koing rims yokohama parda spec2 tires aerospeed coilovers ys1 tranny new clutch full exaust intake(#4000 )obo
i also have an 88 dx with...
i am putting 93 ls in 90 dx hatch what do i have to do to go from obd0 to obd1 motor do i have to change the dizzy and injectors to obd0 or can i just change the plugs and does it matter what obd resistor box you use matter
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.