Search results

  1. 9

    Engine types

    Ok, engine is on it's way (F22B dohc). I got it from venus-auto.com. They seem to be legit people and very knowlegeable. I just need a quick rundown of parts needed to complete the swap in as short a time as necessary. H23 PS hose. Not too sure about the ecu yet.....any suggestions? It's gonna...
  2. 9

    A little help is needed....

    Yes, it is running a OBD2 Integra LS ecu. He also has a GSR ecu. Not too sure what year tho. I'll see what happens when we get the O2 sensors wired up and take it from there..........thanx a bunch guys!! :)
  3. 9

    A little help is needed....

    Well, I'm not too sure where to look for info on what needs to go where? I don't have any manuals available except Chilton books. We don't have the good ones here........ I am at my wits end. Are there sensors missing from the OBD2 ecu that's not there on the OBD1 engine? All of the sensors on...
  4. 9

    engine cuts out at 4500

    Well, I'm still fairly new to the Honda scene myself but if you're getting a solid CEl light when you run Diag. to pull codes, it sounds like a bad ecu maybe? See if maybe you can swap the ecu for another one and see if that helps.
  5. 9

    A little help is needed....

    It idles smoothly, no misfiring until you start to get on it. I edited my post just earlier and the donor engine is a OBD1 engine from a 1994 Integra LS. Are the sensors different from OBD1 to OBD2?
  6. 9

    A little help is needed....

    Hey guys, my buddy and I swapped in a 1.8L LS non VTEC dohc engine into his '98 EK hatch. We are using a Civic Si harness of the same year and using the LS ecu. It's throwing several codes and 2 of them I can account for because it has no O2 sensors hooked up yet. Here's the codes I pulled from...
  7. 9

    Engine types

    Ok guys. I have done some searching/looking around and I decided to go F22B dohc route. I found a great deal on one for $350 (long block). What I have learned is that the cams from a H23 will swap between them. What about the external stuff on this engine like header/accessory mounts/distr. and...
  8. 9

    Engine types

    Well, I am not too sure about the mounts either which is why I was asking about the possibilities of this one......
  9. 9

    Engine types

    Ok, I can't get the engine until Monday and I came across another engine possibility. F20A on ebay for $600 w/free shipping. Would this be better than a sohc F22A6? Would my sohc ECU still run it as well?
  10. 9

    F22A6.......Turbo....or Procharger.....

    Does any one make aftermarket pistons/rods/cam for the F22? I looked at Gude and am not really impressed by the prospect of a regrind although if that's all there is, I guess that's gonna have to do. I know the H22 n/a will pull harder higher than the F22, but the F22 boosted won't need to rev...
  11. 9

    Engine types

    Thanx for the input Tab. I don't plan on spinning it any faster than the 6200rpm shift point anyways. That's where the trans shifts itself all the time at WOT. The rev limiter is 6500rmp too. So I think I should be ok. I already know I'm gonna have to relocate the batt to the trunk to make room...
  12. 9

    F22A6.......Turbo....or Procharger.....

    That's what I was considering was a T3/T4 hybrid. Smaller turbine housing to spool up a bit quicker and a bigger compressor housing to flow a bit more air if need be.
  13. 9

    F22A6.......Turbo....or Procharger.....

    What would you say is the max psi for a street driven F22 series? I was shooting for 10 psi on pump gas and a good tune. I'll keep the auto in there long enough until I get me a 5spd to swap in it.
  14. 9

    F22A6.......Turbo....or Procharger.....

    Well that kinda sux ass. The H22A is the best powerplant for a swap for my year Accord. It's a shitload of hassle to swap a B series or K series. Mahle pistons aren't that bad. SVT Cobras come with them and people have run 18+ psi with no failures? But yeah, I priced out a Procharger C1...
  15. 9

    Engine types

    ok guys, I really appreciate the help with the H22 info, but I found a sweet ass deal on another F22A6 here locally. It has less than 80K miles and looks like brand new. The car is a 1992 EX 4dr and was rear ended quite badly. I'm getting the complete long block for $400. That's a seal in my...
  16. 9

    F22A6.......Turbo....or Procharger.....

    And how much power can I get from it with a safe Hondata tune? I think the F22A6 is an excellent candidate for boost because of it's inherent low compression ratio (8.8:1). What psi would you say is safe for a sub 80K mile engine in good running order? What kind of whp could I expect w/an auto...
  17. 9

    Engine types

    Ok, I have been reading up on the H22A. What yrs have the defective auto tensioner? How hard is it to fix?
  18. 9

    Engine types

    So you're telling me the harness that my F22A6 uses will work on the H22 as well? Aren't the sensors different between them? I was saying because the H22 I'm gonna get is coming from hmotorsonline unless you know of a more reputable place that's maybe cheaper? They told me it will come w/the...
  19. 9

    Engine types

    Well, I'm not going to have enough money for the H22A swap for about a month or so. I had to file my taxes snail mail route. My g/f is getting hers on the 17th and with that, I was debating on getting a cheaper engine just to tool around in. On a related subject, is the wiring that hard to do...
  20. 9

    Engine types

    Ok guys.....I'm the newest nOOb here and I'm in somewhat of a rut. I own a 1992 Accord EX auto. The engine has an absurd amount of miles and I just replaced the cyl head a week ago. Anyways, it has a rod knocking and is otherwise a timebomb waiting to go off. I have been debating on doing the...
  21. Try your Search on Google

Back
Top