Search results for query: *

i jus bought this 90 hatch with a b18a swap. car was running fine untill this morning. its puttering and chugging till 4000rpm. idles at like 450-1000. it wont die out but when i start moving i have to peddle the throttle to get it to 4000 then i can jus drive it normal. idea's please! i am not...

i have a 91 hatch si w/b18 turbo. is their any other place besides the back of the block to install an oil pressure sender? on the passenger side of my cylinder head their is an plug with an allen head. if i take that plug out will their be oil pressure coming from that port?

i have a 91si hatch w/b18a turbo. is their other places to instal an oil pressure gauge sender, besides the back of the block? is it possible to tap in somewhere off the head?

my b18 turbo 91 si hatch, overheats when i drive for long periods on the highway. i want to change my turbo and manifold setup. so i can run the full size rad that the car came with stock. what manifold do i need to use for the turbo to clear the full size radiator?

1995 civic w/2001 h22a body is clean shaved door handles and license plate. interior wrap sony speakers pioneer head unit jacksonville, florida asking 5000 will consider trade call 904-382-3079 ask for josh message me for pics

1991 civic hatch dx, the car has no underdash harness. Swapped a obd1 jdm zc in and have no harness for that either. What harnesses should i use for the vehicle and the engine?

The car (91dx hatch) was bought with a blown motor and electrical issue in the vehicle wiring harness. I swapped a jdm obd1 zc in it. The motor came with no wiring harness, i have enough pieces from other harnesses 90-94. Is it possible to rip the existing chassis harness and fuse box out. Then...

I swapped a jdm zc (zc stamped on block, and crank angle sensor is in dizzy not on cam) into a 91 dx hatch. I purchsed a pm6 ecu, I performed the mpfi swap on the dx harness, and got all sensors wired. The injectors are working, and the ecu has no codes. I'm not getting any power from dizzy...

Swapped a jdm zc into a 91 dx hatch. Bought a pm6 ecu did the mpfi swap on the dx harness got all sensors wired, and injectors working no codes. Im not getting any power from the dizzy plug and the engine harness. I have pulled the harness out and completely unwrapped it to ohm out every wire...

i swapped a jdm dohc zc into a 1991 dx hatch using pm6 ecu and stock dx harness i have all sensors wired correct except the IAT sensor my dx harness does not have a plug or wires for it im throwing the code for it can i wire the senor comeing from the thermostat to ecu? also did mpfi swap i only...

swapped a jdm zc into a 91 dx hatch using stock harness had everything wired up got spark and fuel lost it some how and now cooling fan comes on when i turn the key on and im getting power to the ground at the thermostat dont know if my wiring is write or not please help

swapped a jdm zc into a 91 dx hatch using stock harness had everything wired up got spark and fuel lost it some how and now cooling fan comes on when i turn the key on and im getting power to the ground at the thermostat dont know if my wiring is write or not please help