Search results

  1. B

    i need a d16y8

    motor i have a 97 d16y7 and trans all new parts make me an offer.
  2. B

    p73 a01 or a02

    does any one have a p73 a01 or a02 ecu they want to sell.
  3. B

    scaner is not talking to ecu

    im using globle obd2 info and i have shorted the 2 pin connector and it wont flash any codes i think the ecu is bad.thanks for all the help.
  4. B

    scaner is not talking to ecu

    how do i know if it a jdm ecu and if it is how do i pull codes and clear them.
  5. B

    scaner is not talking to ecu

    yes it works the the outer ecu.is it possiable that the p73 ecu has a differant pin it uses to talk to the scaner. all the wiring diag.i have found say that it should be pin c8
  6. B

    scaner is not talking to ecu

    I have a b18cr jdm swap with a p73 ecu and it wont talk to the scaner i have check the wiring and all is good.I pluge my stock ecu in and it works fine.can any one help.
  7. B

    need your tranny!!!

    i have a 95 hydro trans.has a bearing bad but works fine.no gear grind.if you want it make offer.
  8. B

    scaner not reading ecu

    I have a 97 civic with a b8cr swap and the scaner wont talk to the ecu,I have check the wiring and every thing is good.I pluged my old ecu in and it works fine.I have a p73 ecu for the b18 motor I was woundering if the wiring is different for the p73or if the ecu is just bad.Any help would be great.
  9. B

    how to tell a true b18cr

    what would i be looking for when i pull it off.i will be pullong it off soon to put the turbo on it.
  10. B

    boosting a b18cr

    i just want to make it reliable and safe.around 300 350 would be nice on 93 oct.i have a turbo speciltys kit.
  11. B

    how to tell what year a block is

    thanks that helps alot.if done a compression test and it all looks good so im going to roll with it .thanks again
  12. B

    how to tell what year a block is

    the head has 95 stamped on it.i just bought a96-97 jdm 18cr swap and some things just dont make sence.like the plug wires have 1990 stamped on them.i just want to make sure i got what i paid for,you know what i mean.
  13. B

    how to tell what year a block is

    is that for yhe head or the block
  14. B

    how to tell what year a block is

    is there any way to tell what year a block and heads is on a b18cr .
  15. B

    how to tell a true b18cr

    thanks that helps it says pr3 .i just wanted to make sure i dident get screwed .
  16. B

    boosting a b18cr

    how much boost would be safe then .4-6psi 6-8 psi.i have a 255lph pump and 440 cc injectors.you think that will do.
  17. B

    how to tell a true b18cr

    well i did but im new at this swap thing and i saw some things that dident make sence like my d16y7 has stampt pe2 on the block by the intake and my ecu matches that .my swap block has b18c on it and stamped p72 by the intake and i have a p73 ecu.and i look up ecu and ap73 goes with a 96-97...
  18. B

    how to tell a true b18cr

    is there any way to tell if i have a real b18cr motor.
  19. B

    civic axels

    i want to get new axels for my 97 civic i put a b18cr swap in and not sure what axels to get any hlp would be great
  20. B

    b18cr wiring

    im doing a jdm b18cr swap in my 97 civic and there is a ckf sensor on my civic that the jdm does not have do i need to worrie about it any help would be great
  21. Try your Search on Google

Back
Top