Fixed it! It starts!!
I didn't have switched 12 volts going to the injectors, that plug i was talking about needed a cap on it to power all of the wires......so dumb. But it works now!
In response to my setup, i'm running a chipped p28, and an older obd1 harness. I had to make my own vtec sub harness and a couple other changes to it like wire the obd2 dizzy plug on, the alt plug and a couple other plugs extended.
Its running really well now, i let the engine come all the way up to temp and it sounds purty.
when i had the head pulled to get it rebuilt i added in new valve guides, new springs, and new retainers....should i allow it to go through a break in period? i would assume so anyone have any exp with that?