I just got my block back and a few misc. parts so now its time to put it all together again. Maybe this should be in multimedia? But I plan on doing maybe a little writeup of the build process to help provide a little info. Build list:
HEAD
PR3 casting
JUN III cams
Golden Eagle cam gears
Portflow port and polish and 3angle valve job
Portflow inners type R outers
Titanium retainers
Bronze valve guides
New rocker arms
JG "sheetmetal" intake w/70mm RPM service throttle body
RC 440 injectors
GE fuel rail
Walbro fuel pump
ARC intake
BLOCK
B16b sleeved to 85mm by Benson's
GSR crank balanced and micropolished by Benson's
Probe I beam rods
CP 8.1cc strutted pistons 12.5:1 compression
Rage 4-2-1 header
ITR trans with 4.78 final drive
Hondata s200, plxm300 wideband o2
Last year at 81mm with a crap ebay header and stock manifold I put down 208whp and 140ft/lbs. I'm hoping for 240 and 160 this year, we will see!!! I should have it together within the week, I'll post up more pics as I go along. Here are some to get started.
HEAD
PR3 casting
JUN III cams
Golden Eagle cam gears
Portflow port and polish and 3angle valve job
Portflow inners type R outers
Titanium retainers
Bronze valve guides
New rocker arms
JG "sheetmetal" intake w/70mm RPM service throttle body
RC 440 injectors
GE fuel rail
Walbro fuel pump
ARC intake
BLOCK
B16b sleeved to 85mm by Benson's
GSR crank balanced and micropolished by Benson's
Probe I beam rods
CP 8.1cc strutted pistons 12.5:1 compression
Rage 4-2-1 header
ITR trans with 4.78 final drive
Hondata s200, plxm300 wideband o2
Last year at 81mm with a crap ebay header and stock manifold I put down 208whp and 140ft/lbs. I'm hoping for 240 and 160 this year, we will see!!! I should have it together within the week, I'll post up more pics as I go along. Here are some to get started.
Last edited: