I figured fuck it, I'll contact Eibach and figure out what else I need to put these on. I called, and spoke with a guy on the phone who didn't make much sense, but told me that the kit I need has the same part number as the kit I have (4017.321), except with a 'g' at the end. So the part number of the kit for a car WITHOUT factory front and rear sways is 4017.321G. He said he'd email me the installation instructions for that kit. This was at 3:00. At 5:30, I called back and asked about the email (because I had yet to receive one). He said they were converting it to a format that they could email me. I said ok, cool. 2:00 PM the next day (yesterday), I still hadn't received an email. I called Eibach AGAIN and spoke with a different guy, who said he'd email them right away. I got an email, but he emailed me the same instructions I already have (for a car that came with factory bars).
I emailed him back the following:
Received this email back from him:
So I responded...
I have yet to get rude. Normally, I'd be spastic at this point. I mean, c'mon, I obviously know that the instructions I'm asking for are for the vehicle without a factory front bar. Today, I got this email back from him:
At this point, I'm about ready to explode. I'm trying to figure out what stuff that I need to make this work, and I seem to be getting nowhere. However, I remained calm in the email that I replied with.
<_<
Discuss.
I emailed him back the following:
From: William Kitchens [mailto:william@hondaswap.net]
Sent: Thursday, April 07, 2005 2:10 PM
To: Adrian Walker
Subject: Re: Instructions
Whats up man...
Would it be possible for you to email me the instructions for the kit for civics WITHOUT the factory sways? I believe the guy I spoke with yesterday said it's the same part number, only with a 'G' at the end...
for 92-95 civics
Thanks for your time, and sorry about the trouble
William Kitchens
william@hondaswap.net
Received this email back from him:
From: "Adrian Walker" <AWalker@EIBACH.COM>
Date: Fri, 8 Apr 2005 07:42:49 -0700
To: <william@hondaswap.net>
Subject: RE: Instructions
That kit only works with vehicles without the factory front bar.
So I responded...
From: William Kitchens [mailto:william@hondaswap.net]
Sent: Friday, April 08, 2005 2:34 PM
To: Adrian Walker
Subject: RE: Instructions
Right...my car DOESN'T have the front bar...
What happened, was I bought the kit from a guy off a web forum. He told me this kit was the kit for a civic without a factory front bar (it's a 92 CX). I received the kit, and what I got was the kit for a car with factory front and rear sways, along with a few extra pieces. I'm trying to figure out what else I need to be able to install this kit on my car. Attached is a picture of everything I have. If you could tell me what other parts I need to purchase from you guys, along with sending me the instructions to install them on a car that did not come with the factory antisways, it'd be awesome.
Thanks
William Kitchens
william@hondaswap.net
I have yet to get rude. Normally, I'd be spastic at this point. I mean, c'mon, I obviously know that the instructions I'm asking for are for the vehicle without a factory front bar. Today, I got this email back from him:
From: "Adrian Walker" <AWalker@EIBACH.COM>
Date: Fri, 8 Apr 2005 14:44:54 -0700
To: <william@hondaswap.net>
Subject: RE: Instructions
This is the only one we make for that year is the 4017.321 the (g) is not part of the part # but is to look at the (g) not at the bottom of the page. If it doesn't work I'm not sure you got the right part. You are more than welcome to call and talk with a tech.
At this point, I'm about ready to explode. I'm trying to figure out what stuff that I need to make this work, and I seem to be getting nowhere. However, I remained calm in the email that I replied with.
Um...I called, and got some kinda message that I really didnt understand what was going on..I dunno if it was voicemail or what.
At any rate, you're telling me that there is not a kit for a 1992-1995 civic WITHOUT factory front and rear anti-roll bars? I found this kit on Overboost.com, which I believe to be the kit I need: http://www.overboost.com/obs/product.asp?pid=4968 It shows part number 4017.32, and is for a 92-95 Honda Civic 2-door & 4-door (Without factory front bar)
The kit I have is for a civic that came with factory front and rear anti-roll bars. I HIGHLY doubt that there is any difference in the kits, OTHER than that the kit for civics WITHOUT factory bars INCLUDES the brackets to mount the bars.
I'm trying to get a copy of the installation instructions for the kit that is for a 1992-1995 Honda Civic WITHOUT factory front and rear anti-roll bars. That's all I want. I would like to be able to see which parts that I need that I do not have so that I can order said parts.
Thank you.
William Kitchens
william@hondaswap.net
<_<
Discuss.