scottp11
The Seniorest Member....
Almost finished swapping a JDM H22 into a 95 Accord, but have run into a couple of questions... The stock F22 has an external coil while the JDM H22 has an internal. I have a JDM P13 ECU. My question is, how do I wire this up? The plugs on the the JDM distributor match up to the Accord's harness, but will the car start? Do I have to get the USDM Prelude distributor and run the Accords external coil? Will the JDM ECU still run the USDM dizzy and ext. coil?
Also, there are two coolant passages located on the JDM tranny, that the USDM Accord tranny did not have. What do I do with them? Do I loop them to each other or do I have to "T" off of the coolant lines from the throttle body/head?
Anyone that can help me out would be greatly appriciated! Thanks in advance!
Also, there are two coolant passages located on the JDM tranny, that the USDM Accord tranny did not have. What do I do with them? Do I loop them to each other or do I have to "T" off of the coolant lines from the throttle body/head?
Anyone that can help me out would be greatly appriciated! Thanks in advance!