88 CRX Si with B16A P30 ecu. I am a poor man, so I spliced wires to the ecu. I used 3 different references to confirm ecu pin outs. So, the motor will turn-over and the fuel pump will buzz but no spark. Here's some trouble shooting I have performed up till this point.
1. replaced ignitor with known working ignitor.
2. checked #32 fuse and is good.
3. checked for battery voltage between black/yellow wire and ground. ok.
4. checked for battery voltage between white/blue wire and ground. ok.
7. checked for continuity between ignitor body and distributor housing. ok.
any help will be appreciated.
Thanks airgetcha
1. replaced ignitor with known working ignitor.
2. checked #32 fuse and is good.
3. checked for battery voltage between black/yellow wire and ground. ok.
4. checked for battery voltage between white/blue wire and ground. ok.
7. checked for continuity between ignitor body and distributor housing. ok.
any help will be appreciated.
Thanks airgetcha