Originally posted by RICK_FD3S@May 6 2005, 11:16 PM
Tab you are right. If you are using the H23 wiring harness you can use the H23 distributor. The other thing you are going to need out of the H23 is the radiator hose elbow at the front of the motor that has a plug in it. Just make sure you use the H22 injectors. As for engine mounts I'm pretty sure I use all the same as the H23 with not problems on headers fitments or anithing.
[post=496201]Quoted post[/post]
There are a half dozen ways to do anything, or six ways to do it. If it works, use it. This isn't a braniac swap, so just think your way through the problems as they come. There aren't that many surprises.
USDM engines have an extra fan switch on the front of the motor. Use your stock stuff(switch it).