boxinggsxr
New Member
hey this happen to his 00 civic ex what can you guys tell us? is it a spun rod by the way it sounds? how hard is it to fix and is it pricey?
YouTube - DSCF0788
YouTube - DSCF0788
We may earn a small commission from affiliate links and paid advertisements. Terms
ya looks a little loose never noticed that
just replace the damn bearings!.. unless your a pussy who can't take the oil pan and head off an engine.. oem honda bearings are 3-4 bucks apiece and you would only need 2(for 1 rod).. your cylinder walls should be fine.
you are a dumbass..most spun bearings fuckup the crank,he will therefor need a new crank.just replace the damn bearings!.. unless your a pussy who can't take the oil pan and head off an engine.. oem honda bearings are 3-4 bucks apiece and you would only need 2(for 1 rod).. your cylinder walls should be fine.
just replace the damn bearings!.. unless your a pussy who can't take the oil pan and head off an engine.. oem honda bearings are 3-4 bucks apiece and you would only need 2(for 1 rod).. your cylinder walls should be fine.
adding another q to thread
i had read something about putting other kind of pistons/rods in y8 when switching the block but they werent name brand or nothing they were stock but from diff motor and they were supposed to help out wit power or something any1 heard of this