delsol_racer
Junior Member
ok well i picked up this 2000 civic si last saturday and it had 2 misfired in 1 and 3
so i did a full tune up till didnt fix it.
compression test #4:200 #3: 175 #2: 115 and #1: 000
so i bought a master rebuild kit skunk2 stage 2 cams and gears tyep R valves stainless steel springs retainers and all tha good fun stuff
then i drove it at night and relized that there were no dash lights.
so i cheked the fuses all good under dash and under hood
then i checked tha cluster gauge and no power. so i went to the dimmer switch and had power both in and out. i did an ohm test on tha switch and tha ohmes stayed tha samw as i rolled tha switch.????? then i cheked tha radio cuz it has a difftent radio in it. then i found that i have a red/black and a red wire that goes no where and on a wiring digram (that really dosent tell me anything) thoes wires go to the cluster gauge so does anyone know where i need to run them? (i tried running them together and nothing and i tried grounding one of them out and nothing)
and what else could be the prolbem?
so i did a full tune up till didnt fix it.
compression test #4:200 #3: 175 #2: 115 and #1: 000
so i bought a master rebuild kit skunk2 stage 2 cams and gears tyep R valves stainless steel springs retainers and all tha good fun stuff
then i drove it at night and relized that there were no dash lights.
so i cheked the fuses all good under dash and under hood
then i checked tha cluster gauge and no power. so i went to the dimmer switch and had power both in and out. i did an ohm test on tha switch and tha ohmes stayed tha samw as i rolled tha switch.????? then i cheked tha radio cuz it has a difftent radio in it. then i found that i have a red/black and a red wire that goes no where and on a wiring digram (that really dosent tell me anything) thoes wires go to the cluster gauge so does anyone know where i need to run them? (i tried running them together and nothing and i tried grounding one of them out and nothing)
and what else could be the prolbem?