I guess my question is I'm having problems with picking out cams, I hear good things about most of the companies. Right now I have a set of Crane Stage 3's (PN: 253-0014) and to be honest the shop that is going to be tuning it said they were crap. Kind of a "would you like to buy some better ones from us?" comment (at least I hope). Anyway they suggest the Skunk2pro2 or Toda B/C.
I read the Cam Guide Sticky but it doesn't list crane.
Any help would be greatly appreciated.
If it helps my setup as of now is
B16 Head:
Port / Polish - 5 angle Intake / 3 angle Exhaust -KMS: Dual Springs, Titanium Retainers, Bronze Valve Guides - Eldelbrock: Victor X Intake Mani Ported / Polished, 65mm Throttle Body - 330 RC Injectors - AEM: Fuel Rail, Regulator, Fuel Filter, Cam Gears, V2 Intake
GSR Block:
Bored .20 - JE 12.5.1 Pistons (hot spots ground down and glass beaded / balanced) - GSR Crank cryo'd and balanced - Eagle H beams - Cometic 82mm Head Gasket - ARP head bolts - KMS modified Oil Pump - Greddy Timing Belt - UR Crank Pulley (Alternator only)
-MSD: Distributer , Coil, 6AL
-Hondata S100
-Old A$$ Landspeed Racing / PowerCore 4-2-1 Exhaust Mani, Race Cat, Midsection - 5zigen Fireball exhaust rear section
I read the Cam Guide Sticky but it doesn't list crane.
Any help would be greatly appreciated.
If it helps my setup as of now is
B16 Head:
Port / Polish - 5 angle Intake / 3 angle Exhaust -KMS: Dual Springs, Titanium Retainers, Bronze Valve Guides - Eldelbrock: Victor X Intake Mani Ported / Polished, 65mm Throttle Body - 330 RC Injectors - AEM: Fuel Rail, Regulator, Fuel Filter, Cam Gears, V2 Intake
GSR Block:
Bored .20 - JE 12.5.1 Pistons (hot spots ground down and glass beaded / balanced) - GSR Crank cryo'd and balanced - Eagle H beams - Cometic 82mm Head Gasket - ARP head bolts - KMS modified Oil Pump - Greddy Timing Belt - UR Crank Pulley (Alternator only)
-MSD: Distributer , Coil, 6AL
-Hondata S100
-Old A$$ Landspeed Racing / PowerCore 4-2-1 Exhaust Mani, Race Cat, Midsection - 5zigen Fireball exhaust rear section
Last edited: