Need to know how to remove the bolt that holds on the Crank Drivebelt Pulley (Harmonic Balancer). AN 1/2 impact wont break it loose. I tried a large breaker bar jammed up on the engine mount , put the car in gear and draged it and the tires just skid any ideas? Its a Civic
You can get a crank pulley tool from Honda, Snap-On, or some companies online if you can wait. Otherwise, take it to Honda, have them crank it, then tighten it again, drive home and remove it yourself.
Honda Special Tool #9356-03 made by Snap-On. Or Honda Master Tech Tool Series SF15-T135 part number SF15-0014. This is a special wrench use to open it.
Originally posted by dohcvtec_accord@Apr 10 2003, 10:01 AM Those look like the ones. Makes life infinitely easier. An impact gun won't always do it, unless you've got a hella-nice gun and compressor.
when i had to get my harmonic balancer off my civicthis is what i did...i took off the plate that covers the flywheel from underneath the car (duh) and stuck a screwdriver in it so it wouldn't move...so i held it there and had my girlfriend break the bolt loose...that's how i got mine off
@Apr 10 2003, 10:01 AM Those look like the ones. Makes life infinitely easier. An impact gun won't always do it, unless you've got a hella-nice gun and compressor.
when i had to get my harmonic balancer off my civicthis is what i did...i took off the plate that covers the flywheel from underneath the car (duh) and stuck a screwdriver in it so it wouldn't move...so i held it there and had my girlfriend break the bolt loose...that's how i got mine off
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.