ZCpowerdSI
Member
so if i get the chipped ecu i dont need the dizzy?
We may earn a small commission from affiliate links and paid advertisements. Terms
your best bet is go with a hondata. either s100;s200;s300. any of these will be just fine.Oh and for the ecu.. would i just need a chipped pm7? or what would i need?
your best bet is go with a hondata. either s100;s200;s300. any of these will be just fine.
You're not converting an ecu to anything. the ecu jumper harness will allow you to plug an obd1 ecu into your obd0 car. this is what you need
http://www.phearable.net/shoppingcart/chipped-obd1-nonvtec-p-32.html
tell them you want a p29 basemap put on the chip. p29 is the obd1 dohc zc ecu.
if you choose to use hondata s200 you will still need a chipped ecu anyway. if you decided to go with an s100 or s300 system then do not order the chipped ecu from phearable. you would need to either buy a socketed ecu and install the hondata s100/s300 system yourself, or purchase an ecu with a unit already installed. for example..
HONDATA S300 P28 PLUG N PLAY PACKAGE CIVIC CRX INTEGRA:eBay Motors (item 260522345595 end time Jan-10-10 21:12:47 PST)
Although it is recommended, you do not need a larger map sensor unless you intend on exceeding 11 psi.
Are you being paid by Hondata or something?
To the OP: there are other free options that are perfectly suitable for what you're doing. I believe I've already stated that once before in this thread...
Awesome!! thanks for the link. i'll be ordering one soon. Thats gonna help me out ALOT.
how much did it cost you total? like shipping and everythingI would recommend xenocron, they chipped my ECU for me, really good customer service, I shipped it out and had it back in 3 days.
how much did it cost you total? like shipping and everything