Ethan's 91 Civic HB Official Thread
- Thread starter Ethan
- Start date
- Replies 241
- Views 26K
We may earn a small commission from affiliate links and paid advertisements. Terms
efhondakid
My name is Byron.
Your missing a cam. 
Your missing a cam.
no its there.
Right now im using a stock d15b2. later on a wanna drop a sohc zc in and build it.
Maybe build it for boost and run about 5-8 psi.
lol don't worry i have a good strong one to break em right off. Honestly im thinking about rebuilding it (the right way) and doing a z6 minie me swap on it. not sure yet tho...
Its Alive!
Got code 10 from the cel
"[SIZE=-2]IAT Sensor (Intake Air Temperature)[/SIZE]
[SIZE=-2]defective circuit or unplugged / defective sensor[/SIZE]"
Ill fix it tomorrow. Enjoy the video for now.
Its Alive! Video by Ethan {KAndE} - MySpace Video
Got code 10 from the cel
"[SIZE=-2]IAT Sensor (Intake Air Temperature)[/SIZE]
[SIZE=-2]defective circuit or unplugged / defective sensor[/SIZE]"
Ill fix it tomorrow. Enjoy the video for now.
Its Alive! Video by Ethan {KAndE} - MySpace Video
Last edited:
Broke my engine harness down today and added wires for the reverse lights. pinned em into 2 open slots in the engine harness plug. now the harness is like brand new. 
ill take more pics tomorrow but here are a couple. Camera died before i could get pics of the finished product.
and no i didn't leave it all open. its got new fresh tape to get
rid of the ripped up 19 year old shit that was falling off of it.
ill take more pics tomorrow but here are a couple. Camera died before i could get pics of the finished product.and no i didn't leave it all open. its got new fresh tape to get
rid of the ripped up 19 year old shit that was falling off of it.
Attachments
efhondakid
My name is Byron.
B swapped EFs are the win.^_^no its there.
I actually have a B2/Z6 mini-me sitting in my garage right now...
used it yet? if so how did it pull compared to a regular b2?
efhondakid
My name is Byron.
It was in the car when I bought it, it was hacked, basicly a Z6 head on the B2 block with an A6 intake mani, and a PM6 ECU. Took it out the second day I had it to swap my old LS into it.
I don't know what happened to my camera so i couldn't get photos or videos today but i did do some work on it.
(1) finished wiring for reverse lights.
(2) welded and installed exhaust.
(3) cleaned up my wiring for radio.
(4) got rid of the unbalanced steelies i had on the front.
(5) fixed the gauge lights. (pin came out of gauge harness)
(6) cleaned about two tons of shit outta the car.
Still cant get rid of the CEL for the code 10. Not to worried about it right now.
GOING TO GET IT INSPECTED TOMORROW!!!
(1) finished wiring for reverse lights.
(2) welded and installed exhaust.
(3) cleaned up my wiring for radio.
(4) got rid of the unbalanced steelies i had on the front.
(5) fixed the gauge lights. (pin came out of gauge harness)
(6) cleaned about two tons of shit outta the car.
Still cant get rid of the CEL for the code 10. Not to worried about it right now.
GOING TO GET IT INSPECTED TOMORROW!!!
Well looks like something good might go into the hatch after all... i just got a b18 block. thinking about building it and putting it in there. any thought on what i should put on or in it? (head pistons ect.) im not too good with money so no shit that's gonna cost me more than a broke 19 year old father could pay.
