Recent content by xenocron

-31 to -3 is normal for NG60 TurboEdit

No you cannot datalog the stock PM6 ECU without a chip using TurboEdit

The only thing you can do is get a 4 wire o2 sensor and wire it up...or chip the P28 ECU you have, and disable the O2 heater in the chip.

XENOCRON is good, I can vouch for that...LOL I know that John Kerr knows his stuff as well and of course Jeff Evans if you are baller and can wait until July for an opening.

On an OBD0 vehicle, you shouldnt need to jumper the service connector to set the base timing with a light. When you go back for a retest, are they only going to test your HC's or are they going to completely retest you?

Alarm?

Crome whether it be the free or Pro version is a great program. The only thing Pro has is the datalogging and dyno tools. Datalogging you can get with a program like Freelog which they are making a lot of strides with more and more every day. Crome free does have the real time updating...

Are you using an HX ECU with the GSR motor in there? I'm confused... I am going to doubt that if you are getting random misfires that fixing the 2 O2 sensor codes are going to fix the misfire...but that is a good start to fixing the codes.

With OBD0 stuff, it always seemed a little more finnicky than OBD1. I am not sure if that is because of the processors in the ECUs or something in the program or ECU code...I am not a code guy. But I have always noticed that similar code updates a lot more consistantly and without problems. I...

To throw some info out there, yes it only takes adding one transistor to a P05 ECU so that you can run a 4 wire O2, BUT, the program on the P05 ECU still thinks there is only a single wire O2 so you need to change the program (IE - chipping). Same with a P28. You can run a single wire O2, but...

Doubtful...most Ebay vendors use what are called 'Dual Wipe' sockets. The Ostrich plugs in best to a machined DIP socket or screw down type ZIF sockets (i happen to sell these) if you need to remove it from time to time.

What part of the ECU was burnt up?

The Ostrich will be used for tuning...and if you have an Ostrich, a burner really isnt required since the battery inside of it is designed to last for about 15-30 years... I just hang the USB cable inside of my glove box and pull it out whenever I need to make updates, it handy and 10 million...

I believe AEM and some of the more advanced EMS's out there have a traction control option using the ABS sensors...

I've chipped/converted hundred's of P05/P06/P28/P75, etc Auto ECUs and never had a problem...