Search results for query: *

  1. S

    ecu pinout in reference section

    i looked up obd-2 pinout for primary o2 sensor and it says c16. I went out to my car and i already ran a wire to the ecu but i dont know how to find "c16" I looked the wiring diagram in the haynes manual and it says its a white wire but on the wiring plug in there are 2 white wires in different...
  2. S

    performance shops in pa

    I just moved to Williamsport, PA from VA beach and i have to say the scene sucks ballz here! Cant find any performance shops, im like the only person with an integra. There are beat up cars everywhere. Everytime i hear a loud exhaust and look thinking it might be a decent car it turns out to be...
  3. S

    turbo related questions

    I'm about to get a turbo kit on my gs-r just had some questions. I'm just gonna run 8lbs of boost till i save for new internals, is the stock injectors good enough or will i be pushing the duty cycle to high for stablility. What is the most cost-effective fuel manag. system out there? A guy...
  4. S

    oil pressure gauge

    I was told to take a 1/8 bspt fitted stainless steel line and hook it up to where the stock oil pressure sensor is near oil filter on a 00' gs-r and run it to a brass "t" fitting, put sender on one end and my fittings from my mechanical autometer gauge to the other side. Is the "t" gonna be...
  5. S

    00 gs-r motor, how to build 12sec on n/a

    ok i did alot of research today and i retract my statement, turbos dont blow motors its the lack of proper tuning or shall i say detonation that causes engine failure. I read also that a gsr rod can withstand up to 500hp and im not too sure about this statement but let me know what u...
  6. S

    00 gs-r motor, how to build 12sec on n/a

    I would like to run turbo but i know too many people that blew there motors from it, even rebuilding the block with internals blow within 7 mths. I guess there downfall might have been not going the more expensive route and get the block fully blueprinted and balanced. I wouldn't care if i came...
  7. S

    Painting abs plastic

    I just got a triple gauge pillar off of ebay and the guy said it was in mint condition from his integra, and it was far from being mint. There is glue and scratches all over it and it's not from shipping. -Anyway- I chewed the guy out for his item description but I guess i'll keep it sand and...
  8. S

    00 gs-r motor, how to build 12sec on n/a

    Im gonna gut my car for weight reduction but i was wondering how much HP i need to run mid 12's in q/m in a 00 gs-r I already have aem fuel rail, and fuel b & M gauge,aem pressure regulator, autometer gauges to cheeck stats while i drive or to help tune. I was thinking about getting a skunk2...
  9. S

    a/c line interchangable?

    I need an a/c high side line for a 00' gs-r that runs from the condensor to the compressor and i found one on ebay but the pic sucks, i dont know if they are all interchangable dispite the year or model (gs,rs,ls,gs-r ect...) any info would help out greatly. :worthy:
  10. S

    What ocatne should i use on my stock b16a sir II?

    i use 93 octane for my stock gs-r
  11. S

    gear oil

    thanks :)
  12. S

    gear oil

    I've decided to change the gear oil in the tranny cuz i dont know when it was last changed and car has 60,000 miles on 00 gs-r i got 2mths ago. Shifting doesnt seem as smooth as should be, no grinds or what not but was wondering if i should just use factory recomended or something better? Thanks!
  13. S

    Cel 1 after going turbo

    just wondering what you mean? Never heard of "crome" thanks
  14. S

    00 gsr

    Should i put 17 or 18in rims on my car? It's not lowered, i dont wanna make it bouncy so id rather save for nice setup, like tein setup with a controller. Thing is i know ill get the rims before the lowering and i dont wanna put 18in if im gonna have a problem lowering in the future. Any thoughts?
  15. S

    confused

    I met this guy that said he had a gsr block and a b16 head with I/H/E. For the price to get a gsr block and do the swap to me doesnt seem like its worth the HP gains, I dont even know how much HP it would make. Any one know? For that price wouldnt it have been smarter to get other upgrades that...
  16. S

    Not sure what to do

    cool, thanks. Only thing is that i checked the junk yards here and noone carries the line. Not easy getting a 2000 gs-r parts from junk yard. Is the 94 up interchangable? as far as a/c high side line?
  17. S

    Not sure what to do

    I'll try not to make this long. About a mth ago i went out of state and ran over a dead deer, felt like super speed bump. It was side swipe car next to me or go over deer on 2 lane highway. Anway lower lip of front bumper was cracked (not 2 bad), everything else was fine (so i thought). My...
  18. S

    gas mileage

    My 00' gs-r stock (just got it mth ago) get around 215 in city on full tank. Is that the norm 4 a gs-r? Sucks because my 2dr civic with mods would get almost 400 on straight interstate (I think is insane!) dont remember in city but was way better then 215. Oh yeah I use 93 octane 4 gs-r because...
  19. S

    00' gs-r factory a/c charge

    cool thanks, id rather do it myself and save money for upgrades then to pay someone to recharge 4 me. A guy wanted 70.00 at a gas station just to vacuum down, 115.00 to recharge also.
  20. S

    00' gs-r factory a/c charge

    ya i found it, Im gonna vacuum the system down but i was wondering........ if the factory charge is 22oz low, 24oz high, does that mean i can put two 11oz cans in and it be fully charged or is there more to that? Cans acutally are 11oz r134a and 2oz oil mixed. I know that temp from vent should...
  21. Try your Search on Google

Back
Top