Search results for query: *

Good point... bigger injectors it is... Question, will the spray pattern be negatively affected by lowering the duty cycle of the injector? or does that only apply to lowering/raising the fuel pressure?

Thanks for the input... the nitrous system is a direct port kit so I am able to jet the cylinders for fuel and nitrous... do you really think I am going to need to up the fuel from the injectors under spray?

Well my car goes on the dyno on monday and I was doing a little prep work in the mean time... I have accel 310 injectors already and I was told that they would be more than sufficent for my app. however, rc says I need at least 330's. Do you think this is correct? I have a set of 370's at a...

The erickracing link doesn't work but thanks for the imput guys... has skunk2 fixed the problem with the intake chamber splitting? I found a victor-x for $348 locally but now to locate a dealer for skunk2

No turbo in the future plans, only nitrous. So definately change out the manifolds or portmatch the stock intake to the throttle body?

I am not sure which intake manifold to buy, skunk2 or victor-x... this is on a pnp (soon to be at least) 98 LS head with a spoon sports 65mm throttle body... also to have a direct port nitrous setup installed long version: I had originally set up my engine with the stock ls intake manifold...

I have spent the better part of this morning researching fuel system setups and I have gotten a little swamped with info... I'm not sure if I have gotten injectors that are too large for my setup or if they are too small... also I am not sure about my fuel pump either. My new engine build is...

Never mind... i'll start my own post :)

Sorry, I should have explained myself more clearly... I wrote that too late at night. Firstly, I would not use regular couduit for a STRUCTURAL cage in the first place (at least not EMT) rather for a chasis stiffening aid. Secondly, the copper pipe is only used to get the measurements for the...

I usually use 1 1/2" ID electrical conduit (1 3/4' OD)... rigid or emt depending on the application (i've built 3 cages/bars to date). You will need to use a mandrel bender to make the bends and you can rent those from an electrical wholesaler for about $40 per day (ask for a hydrolic conduit...

Will 98 integra mirrors fit on my ek hatch? Someone drove by my car and took the drivers side mirror off last night and I need a new mirror now. The integra ones are folding so that would be a nice feature since I have to park on the street... they are the same price for both as for one...

The price isn't bad if they are new but why not just put DSM's in with a resistor box for half that price... Use the conversion table here to figure out what size injector you need: http://injector.com/injectorselection.php?...f81175bbb146bf4 "edit: They are high impedence right? "

Please >>>> someone must have run into a similar problem before with an ls head

I am finally back to installing some left over b16 valve springs in my gf's LS and we came into a problem (or two). On a previous post it was mentioned that ITR springs would fit and on another post I was told that b16 intake and ITR intake springs were the same. Problem 1: -The LS keepers are...

Yeah, after researching their website, I agree that hondata would probably be the best choice, im going to call the local dealer and see how much they will charge for an S200 with programming and 2 hours dyno time. I hhave ruled out the S-afc but not the emanage due to it's upgradeability so...

Hey pills... sorry to bring this up again but I have found one of each (e-manage and s-afc) for reasonable prices... $250cdn (200usd) for the S-afc and $350cdn for the e-manage... the problem is that I am not the only buyer for them I have to decide before tomorrow afternoon which one to...

Hard line is much more reliable and durable. Only the basic Nozzle kit comes with soft lines, once you get up into the higher end kits, they all come with hard line or stainless braided depending on kit.

After a couple of hours hunched over cursing my intake manifold I have finally plumbed in the four fogger jets https://hondaswap.com/gallery/browse.php?album_id=918 DAMN that is harder than it looks I also found time to install my gauges and install the block studs today so it looks like my...

Well im at the finishing stages of my latest build and in desperate need of fuel management and since my budget still cant justify a hondata (next season with the other toys) I am trying to decide between an SAFC and the greddy emanage. Essentially, both are the same price for the base unit (no...

Anyone?