Search results for query: *

Hi i have just swapped my b16a2 for a built 9.01 b18C4 for boost. I have kept my P30 that fuelled the B16.I have also installed a BBK intake manifold and a STR 70mm TB. After a few issues we fired the motor and its reading 180 180 180 180. I checked the plugs they re running rich? Now i kept the...

Hi ive just put my newly built engine into my car its a b18c i have just had pit in it:- CP pistons(9.01) manley rods supertech valve springs arp head bolts str blockguard ive connected everything up and when i tick the engine(without plugs) im getting air blowing outwards from the TB side...

I wanna get rid of my GSR stock intake manifold. Which one would you buy out of the above for boost? <_<

Hi, on a b18c turbo im getting some headwork done and i have an option of an 3 angle valve job. Now the thing is the machinist says that he can do a 30 deg cut , 45 deg cut and as for 60 deg cut he cant manage it with the equipment he has and it will involve sending of the valves. I havent got...

Hi, what clutch should be used for turbo setups producing 400+hp. I currently have a 6 puck clutch in my car at the moment. If i want it to last fdor that power can i just get an act xtreme clutch plate and run my 6 puck disc? what are you using for that power?

Im gonna be putting a built b18c into my EG civic which currently has a b16a2/obd1 in it at the moment. my question is if i use my b16a dizzy on the b18c and keep my 0bd1 wiring will the engine go in without any trouble or will i require other parts?can i keep my b16a alternator etc/gonna keep...

Im aiming for about 400-450whp which one of the turbos the sc61 or t3/67 spool quicker and make more power?? my setup is gonna be:- b18c 81mm cp pistons(9.1) and crower rods skunk2 valve springs & retainers hondata full race mani 44mm wastegate 3" turbo back exhaust which turbo would you go...

Hi, i have decided not to sleeve my b18c and i am just about to get the pistons for it. I was thinking about keeping the stock piston size and not boring the sleeves any further but friends are advising that i bore to at least 81.5mm,will that not weaken the sleeves further?. can anybody see...

Hi i have just had a dc 421 header installed on my 91 crx obdo, and it had 2 sensors on the header close to the top( on the 4 branch). Anyway i relocated them to the bottom of the header just after the manifold branches into 1 pipe. my car keeps bogging and revs keep dying till the car switches...

hi, just a quick question for those who may know will the cp pistons that i bought for my b16a fit a b18c engine the spec of the pistons are 81.5mm and comp is 9.01(cp pistons number sc7001). Its because i decided on a achange of setup. Im pretty sure that b series parts are interchangeable but...

how good are srp pistons and eagle rods? are they good enough for 450whp on a b16 with a t3/t4?

would appreciate your help,need some proffesional advice im from the U.K Anyway im a bit upset because after all the money i have spent in my car i spoke to some hondata dealers here who say that they can only tune my car to 280whp-300whp, i was looking more on the lines of 350-400whp. my setup...

hi i got a question for a friend he has a 88-91 civic b16a1 with pw0(obd0) ecu, i got a ricer chip :P tuned(yeah right) for a p28 b16a2(obd1) ecu. question is will the 28 pin chip from the p28 work in the pw0 i need an urgent reply thanks :)

what thickness should the wastegate vaccum line going from the wastegate to the intake manifold be( 3.5mm,4mm,6mm etc), if it is a certain size should the other vaccum leads eg. boost gauge/bov etc leads be the same size. :)

hi just wanna if it is possible to lower the biting on my civic( at the moment b16a2 with hydraulic trans), when i first bought the car the biting point was pretty low but after a year of rallying around :P the biting has ended up right at the top so i have to lift the clutch up the furthest...

<_< how well will lowering the compression on a b16a to 9.01 using a headgasket be, is it possible to use 2 original headgaskets to get the compression into 9's and use some ARP headbolts. My aim is around 300-350 whp using my t3/t4e .60 trim using hondata. Anybody currently doing this?any...

i have the option of swapping my b16a with my friends b18c4, the reason i may be considering the b18c4 is because i plan to bore to around 84mm making it a 2 liter what i wanted to know is how good is the b18c4? will it work well with my t3/t4e? finally will it be a straight drop in to my 93 EG...

ok i have a 94 civic eg9 and i am wanting to lower my car down approx 3.0", here is my choices what would you do?? <_< Tenzo-r coilovers & tokico hp shocks Dropzone coilovers & tokico hp shocks Ground control coilovers & stock shocks Skunk2 coilovers & stock shocks what would you personaly...

i have gathered all my turbo kit and it is ready to go on i have:- b16a2 9.01 cp pistons/crower rods revhad manifold/external 38mm tial t3/t4e .60 trim custom 2.5" piping 27"x6.5"x3" intercooler greddy bov-apexi intake flamenco-t oil kit 3" dp+apexi n1 exhaust 255lph walbro now heres where the...

hi just wanted to know how difficult it would be to install coilovers and shocks on my car EG9 civic?? what tools will i need anybody know a site where it will guide me on what to do ??