1993 civic swap motor not level

[aaronr]

Have a 1993 civic was auto, swapped a 1994 integra b18 5 speed used the integra motor mounts. car runs but the motor is about 1 to 1.5 inches higher on the tranny side.. Any suggestion
Thanks Aaron

 

[hosmer]

Did you use a manual upper tranny mount?



the auto's have a different one

 

[aaronr]

Quoted post[/post]]
Did you use a manual upper tranny mount?



the auto's have a different one

I used the mount that was on the 5 speed integra tranny

 

[hosmer]

I'm pretty sure you have to use the mount (the part w/the rubber in it) from an EG w/a manual tranny and the bracket (the part that bolts to the top of the trans) from the Integra


Double check, but I'm 98% sure

 

[posol]

you need to weld. the auto mount on the chassis itself is wrong.

 

[hosmer]

gah...I knew the mount was different, but I didn't think it was *that* different




sux0rz

 

[aaronr]

so much for an easy swap

 

[brian11to1]

its never easy when you are converting from auto to manual.